Use the CAN
Use the CAN/LIN bus monitor module to decode the CAN or LIN-Bus signals and display information on physical data like engine temperature, vehicle speed and brake-pedal position as analog waveforms and compare this with the data coming from real sensors.
Applicable to DL850V & DL850EV, DL350 (/VE option), DL950 (/VCE option) ScopeCorder Vehicle Edition only.
| Input Ports | CAN port: 1, LIN port: 1 |
|---|---|
| Maximum sampling rate | Isolation between a port and main body and between ports |
| LIN port specifications | 100 kS/s (60-CH x 1 kS/s per port) |
| Maximum input voltage | -1 V to +18 V (LIN input to GND) |
| LIN supply voltage input range | 7 V to 18 V |
| Maximum allowable common mode voltage | 30 Vrms (CAT I and CAT II) |
| Input connector | D-sub 9-pin (male) |
| Supported protocol | Physical layer: ISO-9141 |
| Supported baud rate | 2400, 9600, 19200bps |
| Supported data length | 4 bytes maximum |
| Input channels | 60 signals/port |
| Supported data field checksum | Standard and extended checksums |
| CAN port specifications | Compliant with CAN Bus Monitor Module (720240) |
| Weight | Approx 250 g |
This module is available for DL850V only. Max. two (2) modules including the 720240 module can be installed.
Yokogawa
Yokogawa
Yokogawa
Yokogawa
Yokogawa