Quick Specs:G1 AC Digital Output 12-140 VAC 5 VDC Logic G1 I/O family The OAC5 output module is used for controlling or switching AC loads of 12-140 VAC. Each module provides up to 4000 volts (transient) of optical isolation between the field devices...

Quick Specs:groov RIO with 2 GB RAM 7GB SSD and Ignition groov RIO® revolutionizes remote I/O by offering over 200,000 unique, software-configurable I/O combinations in a single, compact, PoE-powered industrial package with web-based configuration,...

Electromagnetic Industries Ground Fault Current Sensor GFL 051X117-1200 Application: These Ground Fault Sensors (type GFL) are available in a variety of sizes. Care should be takenwhen determining the physical size of the senor window. The Ground Fault...

Quick Specs:G1 AC Digital Input 90-140 VAC 5 VDC Logic G1 I/O Family The IAC5 input module is used to sense ON/OFF AC voltage levels between 90-140 VAC. All AC input modules are designed with filtering on the input and a hysteresis amplifier for high...

Electromagnetic Industries Ground Fault Current Sensor GFM 425 Application: These Ground Fault Sensors (type GFM) are available in a variety of sizes and current tripranges. Care should be taken when determining the physical size of the senor window. The...

Quick Specs:SNAP 4-Ch -20mA to +20mA Analog Current Input Module The SNAP-AIMA-4 provides four channels of -20 mA to +20 mA analog current input. The module does not supply loop excitation current. Although the four channels are not...

Quick Specs:PCI Express Adapter card for Pamux The PCIe-AC51 is a high-speed adapter card designed to link Opto 22 I/O to PCI Express-compatible computers for PC-based control using the Pamux protocol. Each PCIe-AC51 can access up to...

Quick Specs:groov RIO Power Monitoring module3-phase 600V The GRV-R7-I1VAPM-3 is a  groov RIO energy monitoring unit (EMU) designed as an intelligent, distributed power and energy monitoring module. With built-in web-based configuration, commissioning,...

Quick Specs:G4 Digital 4-Channel Mounting Rack G4 I/O family The G4PB4 I/O mounting rack compactly accommodates up to four G4 digital I/O modules in applications where only a few I/O points are needed. Single-channel G4 I/O gives you maximum...

Quick Specs:G1 0 to +5 VDC Analog Input G1 I/O family The AD6 analog input module provides a single channel of optically isolated voltage-to-digital conversion. Nominal voltage input is 0 to + 5 VDC. This module mounts on a G1 analog mounting rack,...

Quick Specs:G1 4 to 20 mA Analog Input G1 I/O family The AD3 analog input module provides a single channel of optically isolated current-to-digital conversion. Nominal input is 4 to 20 mA. This module mounts on a G1 analog mounting rack, for example...

Description:50A Hall Effect SensorTrack Specifications via Part Number: