Absolute Process Instruments APD 6380 D _ AC to DC transmitter-Fully isolatedCecomp Electronics, APD 6380 D, AC to DC Isolated Signal Conditioner, 18 Output Ranges, 9-30 VDC, 10-32 VAC PowerFeatures:One Minute Setup for Hundreds of I/O RangesExternal...

Electromagnetic Industries 3 Phase Voltage Monitor SPVR 480Electromagnetic Industries 3 Phase Voltage Monitor SPVR 480/SPVR2-480 Application: The EI-SPVR2 is designed to monitor Phase to Phase voltage for three Phase electricalequipment that are...

What's included with the AEMC Instruments 2135.36 2 x 300 ft color-coded leads on spools 2 x 100 ft color-coded leads (hand-tied, green/black) 2 x 5 ft color-coded leads (blue/red) 4 x 14.5" T-shaped auxiliary ground electrodes Set of five spaded...

AEMC 3000-36-1-1 Description: Composed of an electronic module and flexible sensor, which permits measurements on conductors where standard clamp-on probes cannot be used. The flexibility makes it easy for the sensor to be installed in tight spaces,...

The AEMC 407 is a power clamp meter which measures power parameters of single and three-phase systems, including in rush current and frequency. Records up to 1000 measurements and is enabled with wireless Bluetooth communication. DESCRIPTION The AEMC 407...

The Fault Mapper Model CA7024 is a hand-held, alphanumeric, TDR (Time Domain Reflectometer) Cable Length Meter and Fault Locator, designed to measure the length of electrical and communication cables. It can also indicate the distance to a fault in the...

AEMC 2118.77 Description: The AEMC 211877 10 A Rotating Spring Loaded Pencil Point Kelvin Probes can be used with any micro-ohmmeter that has binding posts from 4mm to 6mm in diameter or safety terminals 4mm in diameter. The test probe is useful for very...

Norgren F68G-NNN-MR3, Olympian Plus general purpose filter, without yoke, manual drain, 40µm filter elementNorgren F68G-NNN-MR3, Olympian Plus general purpose filter, without yoke, manual drain, 40µm filter element ITEM: F68G-NNN-MR3 Effective...