OPTO 22

OPTO 22 - Z240D10-17 _ Z Model, 240 VAC, 10 Amp, DC Control Solid State Relay (SSR), Replacement Part Only

Write a Review

OPTO 22 - Z240D10-17 _ Z Model, 240 VAC, 10 Amp, DC Control Solid State Relay (SSR), Replacement Part Only

Rating Required

Name Required

Email Required

Review Subject Required

Comments Required

$25.20

Brand

OPTO 22

SKU:

Z240D10-17

Description
0 Reviews

Quick Specs:

Z Model
240 VAC
10 Amp
DC Control Solid State Relay (SSR)
Replacement Part Only

This Z Model, 240 VAC, 10 Amp, DC Control Solid State Relay (SSR) should be used as a replacement part only. For new development, use the equivalent Z240D10 SSR instead. The two parts are manufactured identically using the same VDE-approved optocoupler and have identical specifications.

Lots of information on choosing and using SSRs can be found in the SSR data sheet. Also see the Manufacturers' part number cross-reference list.

NOTE: We do not recommend mounting the terminal side of the SSR to a flat PCB (printed circuit board) or other flat surface, because there may be some variation in terminal height or alignment from one terminal to another and from one SSR to another. For PCB boards, use the MP or P series SSRs.

Specifications:

NOTE: Specifications for Z240D10-17 are identical to Z240D10.

120/240 Volt Solid State Relays

AC Power Series 120/240 Volt:
Plastic Package (Z Series)

	Z120D10	Z240D10
Nominal AC Line Voltage Nominal	120	240
Current Rating (Amps)	10	10
1 cycle Surge (Amps) Peak	110	110
Nominal Signal Input Resistance (Ohms)	1000	1000
Signal Pick-up Voltage	3VDC (32V allowed)	3VDC (32V allowed)
Signal Drop-out Voltage	1 VDC	1 VDC
Peak Repetitive Voltage Maximum	600	600
Maximum Output Voltage Drop	1.6 volts	1.6 volts
Off-State Leakage (mA) Maximum**	6 mA	12 mA
Operating Voltage Range (Volts AC)	12-140	24-280
I²t Rating t=8.3 (ms)	50	50
Isolation Voltage	4,000 V_RMS	4,000 V_RMS
Ã¸jc* (°C/Watt) Dissipation (Watts/Amp)	4	4
Agency Approvals	CE, CSA, RoHS, UKCA	CE, CSA, RoHS, UKCA
Notes: Ã¸jc* = Thermal resistance junction to base. Maximum junction temperature is 110°C. ** Operating Frequency: 25 to 65 Hz (operates at 400 Hz with 6 times the offstate leakage)

Write a Review