OPTO 22 - SNAP-IDC5Q _ SNAP 2-Axis Quadrature Position Input Module

Quick Specs:

SNAP 2-Axis Quadrature Position Input Module

The SNAP-IDC5Q quadrature input module is designed to allow a SNAP brain to resolve two axes of rotating position information from quadrature encoder devices. The module outputs a pulse to the brain upon each change in quadrature state. The brain counts the module output pulses and keeps track of the direction and position.

The SNAP-IDC5Q is used with SNAP-PAC-EB1 brains and SNAP-PAC-R1 controllers. The module is also fully compatible with legacy SNAP-B3000-ENET and SNAP-UP1-ADS brains, as well as B3000 and B3000-HA brains using the mistic protocol.

The SNAP-IDC5Q can be used with most quadrature devices, including transducers with TTL, CMOS, and open collector outputs. All inputs are isolated from each other and do not share any common connections.

Part of the SNAP PAC System, the module mounts on a SNAP PAC rack with a SNAP PAC brain or rack-mounted controller. Analog, digital, and serial I/O modules can all be on the same rack. Such an I/O unit is also well suited for PC-based control or for use as intelligent remote I/O for an Allen-Bradley Logix PLC system, such as ControlLogix, MicroLogix, or CompactLogix.

For easier, faster wiring, see SNAP TEX cables and breakout boards.

Build your system in the SNAP I/O Configurator.

Specifications:

Logic Voltage	5 VDC
Operating Ambient Temperature	-20 to 70 °C
Isolation input-to-output	4,000 Vrms
Input Voltage Range	4 - 24 VDC
Input Resistance	1K ohms @ 4 V 560 ohms @ 24 V
Input Allowed for No Output	1 V
Logic Supply Current @ 5 VDC	120 mA
Maximum Input Frequency, 50% Duty Cycle	25 kHz for SNAP PAC brains and controllers with high-speed digital functions Legacy brains vary*
Maximum Reverse Input Voltage	- 21 V
Torque, hold-down screws	4 in-lb (0.45 N-m)
Torque, connector screws	5.26 in-lb (0.6 N-m)
Agency Approvals	CE, ATEX, FM, RoHS, DFARS; UKCA
Warranty	Lifetime
* The SNAP-IDC5Q supports an encoder input frequency of 25 kHz. However, legacy I/O brains have limited quadrature counting capability. The following limits apply to them: 2.5 kHz for SNAP-B3000-ENET brains 4 kHz for SNAP-UP1-ADS brains 5 kHz for other legacy brains with high-speed counting

Write a Review