OPTO 22 - OAC5P _ Flat Pak Output Module, 12-140 VAC
Write a Review
OPTO 22
OPTO 22 - OAC5P _ Flat Pak Output Module, 12-140 VAC
- Brand
- OPTO 22
- SKU:
- OAC5P
OPTO 22 - OAC5P _ Flat Pak Output Module, 12-140 VAC
OPTO 22 - OAC5P _ Flat Pak Output Module, 12-140 VACQuick Specs:
- Flat Pak Output Module
- 12-140 VAC
Because of their low profile, Flat Pak modules are ideal for user-designed printed circuit boards where the standard single-channel or Quad Pak modules do not provide an exact fit.
The OAC5P handles 12-140 VAC. This module is used for controlling or switching AC loads. It is equivalent to a single-pole, single-throw, normally open contact (FORM A, SPST-NO, Make). The OAC5P features zero voltage turn-on and zero current turn-off. The module provides up to 4000 V of optical isolation between field inputs and the logic side of the circuit.
Typical uses and applications include switching the following loads:
- Relays
- Solenoids and contactors
- Motor starters
- Heaters
- Lamps or indicators
Specifications:
|
| OAC5P | ODC5P |
| Operating Voltage Range | 12 - 140 VAC | 5 - 60 VDC |
| Line Voltage, Nominal | 120 VAC | n/a |
| Current Rating | 3 A @ 45 °C ambient 2 A @ 70 °C ambient | 3 A @ 45 °C ambient 2 A @ 70 °C ambient |
| Off-state Leakage at Maximum Voltage | 5 mA, rms | 1 mA |
| Logic Voltage, Nominal | 5 VDC | 5 VDC |
| Logic Voltage Range (Vcc) | 2.5 - 8 VDC | 2.5 - 8 VDC |
| Logic Pickup Voltage | 2.55 VDC | 2.5 VDC |
| Logic Dropout Voltage | 1 VDC | 1 VDC |
| Logic Input Current at Normal Logic Voltage | 12 mA | 12 mA |
| Control Resistance (Rc in Schematic Diagram) | 220 Ohms | 220 Ohms |
| One-second Surge | n/a | 5 A |
| One-cycle Surge | 80 A peak | n/a |
| Peak Repetitive Voltage | 500 V | n/a |
| Minimum Load Current | 20 mA | n/a |
| Operating Frequency | 25 - 65 Hz | n/a |
| Turn-on Time | 1/2 cycle maximum, zero voltage | 100 microseconds |
| Turn-off Time | 1/2 cycle maximum, zero current | 750 microseconds |
| DV/DT, Off-state | 200 V/microsecond | n/a |
| DV/DT, Commutating | Snubbed for rated 0.5 power factor load | n/a |
| Output Voltage Drop Maximum Peak | 1.6 V | 1.6 V |
| Operating Temperature | - 30 to 70 °C | - 30 to 70 °C |
| Agency Approvals | UL (E58169), CSA (35852) | UL (E58169), CSA (35852) |
| Warranty | Lifetime | Lifetime |
0 Reviews Hide Reviews Show Reviews
OPTO 22
OPTO 22 - IAC5P _ Flat Pak Input Module, 90-140 VAC/VDC
OPTO 22
OPTO 22 - ODC5P _ Flat Pak output module, 5-60 VDC
OPTO 22
OPTO 22 - IDC5P _ Flat Pak Input Module, 10-32 VDC or 12-32 VAC
OPTO 22
OPTO 22 - G4OAC5 _ G4 AC Output 12-140 VAC, 5 VDC Logic
OPTO 22
OPTO 22 - G4OAC15 _ G4 AC Output 12-140 VAC, 15 VDC Logic
OPTO 22
OPTO 22 - G4OAC24 _ G4 AC Output 12-140 VAC, 24 VDC Logic
OPTO 22
OPTO 22 - OAC24 _ G1 AC Digital Output, 12-140 VAC, 24 VDC Logic
OPTO 22
OPTO 22 - OAC5 _ G1 AC Digital Output, 12-140 VAC, 5 VDC Logic
OPTO 22