OPTO 22 - MP240D4-17 _ MP Model, 240 VAC, 4 Amp, DC Control Solid State Relay (SSR), Replacement Part Only
- Brand
- OPTO 22
- SKU:
- MP240D4-17
OPTO 22 - MP240D4-17 _ MP Model, 240 VAC, 4 Amp, DC Control Solid State Relay (SSR), Replacement Part Only
OPTO 22 - MP240D4-17 _ MP Model, 240 VAC, 4 Amp, DC Control Solid State Relay (SSR), Replacement Part OnlyQuick Specs:
- MP Model
- 240 VAC
- 4 Amp
- DC Control Solid State Relay (SSR)
- Replacement Part Only
Lots of information on choosing and using SSRs can be found in the SSR data sheet. Also see the Manufacturers' part number cross-reference list.
Specifications:
NOTE: Specifications for MP240D4-17 are identical to MP240D4.
120/240 Volt Solid State Relays
| MP120D2 | MP120D4 | MP240D2 | MP240D4 | MP380D4 |
Nominal AC Line Voltage | 120 | 120 | 240 | 240 | 380 |
Nominal Current Rating Amps | 2 | 4 | 2 | 4 | 4 |
1 cycle Surge (Amps) Peak | 20 | 85 | 20 | 85 | 85 |
Nominal Signal Input | 1000 | 1000 | 1000 | 1000 | 1000 |
Signal Pick-up Voltage | 3VDC*** | 3VDC*** | 3VDC*** | 3VDC*** | 3VDC*** |
Signal Drop-out Voltage | 1 VDC | 1 VDC | 1 VDC | 1 VDC | 1 VDC |
Peak Repetitive Voltage Maximum | 600 | 600 | 600 | 600 | 800 |
Maximum Output Voltage Drop | 1.6 volts | 1.6 volts | 1.6 volts | 1.6 volts | 1.6 volts |
Off-State Leakage mA Maximum** | 5 mA | 5 mA | 5 mA | 5 mA | 5 mA |
Operating Voltage Range (Volts AC) | 12 - 140 | 12 - 140 | 24 - 280 | 24 - 280 | 24 - 420 |
I2t Rating t=8.3 (ms) | 2 | 30 | 2 | 30 | 30 |
Isolation Voltage | 4,000 VRMS | 4,000 VRMS | 4,000 VRMS | 4,000 VRMS | 4,000 VRMS |
øjc* °C/Watt | 20 | 6.5 | 20 | 6.5 | 6.5 |
Dissipation Watts/Amp | 1.2 | 1.2 | 1.2 | 1.2 | 1.2 |
Rating (Motor Load) | 1 FLA at 120 VAC | 2.5 FLA at 240 VAC | 1 FLA at 120 VAC | 2.5 FLA at 240 VAC | 2.5 FLA at 380 VAC |
Notes: øjc* = Thermal resistance junction to base. Maximum junction temperature is 110 °C. |