OPTO 22 - GRV-MM1001-10 _ 8 multifunction, mixed signal channels; 2 form C electromechanical relay output channels

Quick Specs:

8 multifunction
mixed signal channels; 2 form C electromechanical relay output channels

The GRV-MM1001-10 is a 10-channel, multi-signal, multifunction module that supports thousands of unique, software-configurable I/O combinations. Configurable through PAC Control, CODESYS, custom control programs, or through groov Manage, you select from a list of valid software-selectable signal types for each channel, configure its I/O signal, select any function supported by the selected channelsuch as counting, latching, clamping, and moreand then save your configuration.

This module is ideal for projects that have many mixed signal types, and where maximum I/O flexibility is desired.

Part of the groov EPIC^® system, the GRV-MM-1001-10 module mounts on a groov EPIC chassis together with a GRV-EPIC-PR1 or GRV-EPIC-PR2 processor and other analog, discrete, and serial groov I/O modules.

Specifications:

You can find the Specifications further down the page.

Features

	Signal Type
	Discrete Input: Discrete Switch Input, Powered	Discrete Output: DC Sinking	Discrete Output (Mechanical Relay): Form C	Analog Input: Voltage ICTD Thermistor Resistor	Analog Input: Current Thermocouple Millivolt	Analog Output: Voltage Current
Channels:	0 - 7	0 - 7	8 - 9	0 - 7	0 - 3	4 - 7
Features
On/off State	x	x	x
On/off Latching	x
Counting	x
On/off Totalization	x
Frequency Measurement	x
Period Measurement	x
Pulse Measurement	x
Scaling				x	x	x
Offset and Gain				x	x
Minimum/Maximum Values				x	x
Average Filter Weight				x	x
Simple Moving Average				x	x
Analog Totalizing				x	x
Output Pulsing / TPO		x
Ramping						x
Clamping						x
Watchdog Timeout Value		x	x			x
Quality Indication				x	x	x

Specifications

Specification	GRV-MM1001-10
Voltage Input
Available Channels	0 - 7
Input Range	0 - 10 V DC
Over-range Limit	0 - 11 V DC
Resolution	0.5 mV
Accuracy	±0.05% of range (±5 mV)
Gain Temperature Coefficient	10 ppm/°C
Offset Temperature Coefficient	1 ppm/°C
Input Impedance	> 425 kOhms
Data Refresh Time	550 ms x SMA value (1.1 s @ 2 SMA, Default SMA = 2)
50 / 60 Hz rejection	> 90 dB
Current Input
Available Channels	0 - 3
Input Range	0 - 20 mA
Over-range Limit	0 - 20.8 mA
Recommended Fuse	32 - 40 mA, Fast Acting (for example, Eaton S500-32-R)
Resolution	1.0 µA
Accuracy	±0.075% ( ±15 µA )
Gain Temperature Coefficient	25 ppm/°C
Offset Temperature Coefficient	1 ppm/°C
Input Voltage Drop (±10%)	0.9 V @ 4 mA, 2.0 V @ 20 mA, 25 °C
Equivalent Input Impedance (±10%)	225 Ohms @ 4 mA, 100 Ohms @ 20 mA, 25 °C
Data Refresh Time	550 ms x SMA value (1.1 s @ 2 SMA, Default SMA = 2)
50 / 60 Hz rejection	> 90 dB
ICTD Input
Available Channels	0 - 7
Input Range with ICTD Probe	-40 to +100 °C
Resolution	0.04 °C
Accuracy with ICTD Probe	±0.5 °C (0.9 °F)
Gain Temperature Coefficient	2 ppm/°C
Offset Temperature Coefficient	175 ppm/°C
Data Refresh Time	550 ms x SMA value (1.1 s @ 2 SMA, Default SMA = 2)
50 / 60 Hz rejection	> 90 dB
Thermocouple Input
Available Channels	0 - 3 (See note 1)
Input Range	-75 to +75 mV
Over-range Limit	-78 to +78 mV
Input Resolution	3 microvolts
Input Impedance	> 1 MOhms
Data Refresh Time	550 ms x SMA value (1.1 s @ 2 SMA, Default SMA = 2)
50 / 60 Hz rejection	> 90 dB
Thermocouple ITS90 Types	± Accuracy / Resolution
B: 90 °C to 1,820 °C	7 °C / 0.4 °C
E: -80 °C to 1,000 °C	2 °C / 0.1 °C
J: -100 °C to 1,200 °C	2 °C / 0.1 °C
K: -80 °C to 1,372 °C	2 °C / 0.1 °C
N: -100 °C to 1,300 °C	3 °C / 0.1 °C
R: 100 °C to 1,768 °C	7 °C / 0.3 °C
S: 100 °C to 1,768 °C	7 °C / 0.3 °C
T: -60 °C to 400 °C	3 °C / 0.1 °C
Note 1:	To achieve the best thermocouple accuracy when also using current outputs or discrete outputs, always configure thermocouples on the lowest channel numbers and outputs on the highest channel numbers.
Millivolt Input
Available Channels	0 - 3
Input Ranges	±150 mV, ±75 mV, ±25 mV
Over-range Limits	±165.0 mV, ±78.0 mV, ±27.5 mV
Resolution	10 µV, 3 µV, 2 µV
Accuracy	±0.05% of Full Scale (±75 µV), ±0.05% of Full Scale (±37.5 µV), ±0.05% of Full Scale (±12.5 µV)
Gain Temperature Coefficient	10 ppm/°C, 10 ppm/°C, 10 ppm/°C
Offset Temperature Coefficient	1 ppm/°C, 1 ppm/°C, 4 ppm/°C
Input Impedance	> 1 MOhms
Data Refresh Time	550 ms x SMA value (1.1 s @ 2 SMA, Default SMA = 2)
50 / 60 Hz rejection	> 90 dB
Thermistor Input
Available Channels	0 - 7 (See Note 2)
Input Range (Ohms)	0-400k
Accuracy (Ohms @ Range)	greater of 3 Ohms or 0.5%@0-25k, 400@25k - 50k, 900@50k - 75k, 1.5k@75k - 100k, 5k@100k - 200k, 20k@200k - 400k
Gain Temperature Coefficient	500 ppm/°C
Resolution (Ohms @ Range)	0.5@0 - 1k, 1@1k - 5k, 2@5k - 10k, 5@10k - 25k, 50@25k - 100k, 200@100k - 200k, 700@200k - 400k
Power Dissipation @ Resistance (µW@Ohms)	375@1k, 950@5k, 1075@10k, 875@25k, 600@50k, 450@75k, 350@100k, 200@200k, 100@400k
Predefined Thermistor Curves	Accuracy (°C) @ Range (°C)
2252	0.2@-40 - 70, 2.5@70 - 150
3K	0.2@-40 - 70, 2.5@70 - 150
10K type 2	0.75@-40 to -20, 0.2@-20 to 120, 0.6@120 to 150
10k type 3	0.5@-40 to -20, 0.3@-20 to 120, 0.6@120 to 150
Custom	depends on curve
Gain Temp Coefficient	0.015/(°C * Ohm)
Data Refresh Time	550 ms x SMA value (1.1 s @ 2 SMA, Default SMA = 2)
Note 2:	To achieve the best thermistor accuracy when also using current outputs, always configure thermistors on the lowest channel numbers and current outputs on the highest channel numbers.
0 - 400 kOhm Input
Available Channels	0 - 7 (See Note 3)
Input Range (Ohm)	0 - 400k
Accuracy (Ohm @ Range)	greater of 3 Ohm or 0.5%@0-25k, 400@25k - 50k, 900@50k - 75k, 1.5k@75k - 100k, 5k@100k - 200K, 20k@200k - 400k
Gain Temperature Coefficient	500 ppm/°C
Resolution (Ohm @ Range)	0.5@0 - 1k, 1@1k - 5k, 2@5k - 10k, 5@10k - 25k, 50@25k - 100k, 200@100k - 200k, 700@200k - 400k
Power Dissipation @ Resistance (µW@Ohm)	375@1k, 950@5k, 1075@10k, 875@25k, 600@50k, 450@75k, 350@100k, 200@200k, 100@400k
Data Refresh Time	550 ms x SMA value (1.1 s @ 2 SMA, Default SMA = 2)
Note 3:	To achieve the best resistance accuracy when also using current outputs, always configure the 0-400 kOhm channel type on the lowest channel numbers and current outputs on the highest channel numbers.
Switch Input, Powered
Available Channels	0 - 7
Open Circuit Voltage (Switch Open)	10.5 V (minimum)
Channel Current Limit	1.1 mA max.
Channel Operating Current	0.63 mA typical
Minimum Off Resistance	3300 Ohms
Maximum On Resistance	1200 Ohms
Minimum ON Voltage	5 V
Maximum OFF Voltage	1.5 V
Maximum Continuous Survivable Input Voltage	32 V
Input Impedance	> 425 kOhms
Max. Freq. (50% square wave)	10000 Hz
Discrete Counter Input
Available Channels	0 - 7
Input Voltage Range	5 - 30 V DC
'ON' Threshold	5 V
'OFF' Threshold	1.5 V
Input Impedance	> 425 kOhms
Max. Frequency (50% square wave): State, Latches, Counter	10000 Hz
Max. Frequency (50% square wave): On/Off pulse width, Period, Frequency	2000 Hz
Max. Frequency (50% square wave): On/Off totalization	750 Hz
Pulse Width Measurement Resolution	100 microseconds
Pulse Width Measurement Error (50% square wave)	0.1% 0 to 20 Hz. 1% 21 to 200 Hz. 5% 201 to 2000 Hz.
Period/Frequency Error (50% square wave)	0.05% 0 to 20 Hz. 0.1% 21 to 200 Hz. 1% 201 to 2000 Hz.
Discrete DC Sinking Output
Available Channels	0 - 7 (4 - 7 if using any thermocouple inputs)
Line Voltage Range	5 - 30 V DC
Maximum Continuous Current	1.0 A
Peak Current (< 10 ms)	4.0 A
Recommended Fuse / Circuit Breaker	1 A at 30 V DC
Output Voltage Drop	175 mV at 1 A
Off-State Leakage (per channel)	< 80 µA at 24 V, -20 to +70 °C
Peak Blocking Voltage	32 V
TPO Period (min, max, resolution)	0.004, 4294967, 0.001 seconds
Turn On / Off Time	20 ms nominal
Form C Relay Output
Available Channels	8, 9
Line Voltage Range	0 - 250 V AC or 5 - 30 V DC
Clamp Voltage	440 V nominal
Current Rating	3.5 A per channel
Surge Current	6 A peak for 1 second
Recommended Fuse / Circuit Breaker	5 A at 250 V AC / > 30 V DC per channel
Initial Contact Resistance	< 100 mOhms
Turn On Time	8 ms
Turn Off Time	4 ms
Operating Life (to specification)	Min. 30,000 cycles at max. ratings
Mechanical Life	Min. 10,000,000 cycles
Voltage Output
Available Channels	4 - 7
Range	0 - 10 V
Resolution	2.5 mV
Accuracy	±0.35% of range ( ±35 mV )
Gain Temperature Coefficient	20 ppm/°C
Offset Temperature Coefficient	3 ppm/°C
Output Slew Rate	> 15 V/ms
Minimum Load Resistance	7.5 kOhms
Output Impedance	< 10 Ohms
Short-circuit Current	20 mA
Data Refresh Time	Nominal 20 ms. Proportional to I/O scan time.
Current Output
Available Channels	4 - 7
Output Range	0 - 20 mA
Resolution	5 µA
Accuracy	±0.4% of range (±80 µA)
Offset Temperature Coefficient	5 ppm/°C
Output Slew Rate	> 10 mA/ms
Maximum Loop Resistance	700 Ohms
Data Refresh Time	Nominal 20 ms. Proportional to I/O scan time.
Common Specifications
Power Consumption	5 W
Max. Survivable Input (channels 0 - 7)	32 V DC
Isolation (between channels 0 - 7)	None
Isolation (between channel 8 or 9 and all others)	3000 V AC_rms 1 min.
Isolation (field to Ethernet / power input)	1500 V AC_rms 1 min.
Minimum groov EPIC Firmware Version	3.3.0
Minimum PAC Project Version	10.4000
Minimum Library Package for CODESYS Version	2.0.3.0
Wire Size	28 - 14 AWG
Torque, connector screw	2.5 in-lb (0.28 N-m)
Torque, hold-down screw	3.5 in-lb (0.4 N-m)
Temperature (operating)	-20 °C to +70 °C
Temperature (storage)	-40 °C to +85 °C
Relative Humidity (non-condensing)	5 - 95%
Agency Approvals	UL/cUL(Class 1 Div. 2); CE, ATEX(Category 3, Zone 2); RoHS; DFARS; CB Scheme; UKCA
Warranty	30 months

Write a Review