OPTO 22 - G4IDC5-SW _ G4 DC Input - DC voltage, self-powered, normally open

Quick Specs:

G4 DC Input - DC voltage
self-powered
normally open

G4 I/O family

The G4IDC5-SW module provides one isolated channel of contact status input, sensing switch closure. The module supplies 15 volts of power to an external dry contact switch.

Each user-supplied switch is connected with two wires. Because the module includes power for the switch, this module is particularly cost-effective when labor costs for wiring external power are high.

Typical applications for the G4IDC5-SW include sensing contact closure from sources such as proximity switches, limit switches, selector switches, push buttons, photoelectric switches, and TTL-compatible devices.

Opto 22's G4 DC input modules provide up to 4000 volts (transient) of optical isolation between field inputs and the logic output of the circuit.

CAUTION: G4IDC5-SW and G4IDC5-SWNC inputs are not intended to be used with contacts that are connected to any external user-supplied voltage or current.

Specifications:

Field Side Ratings
Open Circuit Voltage (Switch Open)	11 VDC min., 13 VDC typical, 15 VDC max.
Short Circuit Current (Switch Closed)	6 milliamps nominal
Minimum Off Resistance	¥20 K ohms
Maximum Allowable On Resistance (Wire + Contact Resistance)	500 ohms
Logic Side Ratings
Logic Output Voltage for G4IDC5-SW (normally open)	<0.5 V max. (switch closed; LED on) @ 2 mA sinking 2.7 V min. (switch open; LED off) @ 0.4 mA sourcing
Logic Output Voltage for G4IDC5-SWNC (normally closed)	<0.5 V max. (switch open; LED on) @ 2 mA sinking 2.7 V min. (switch closed; LED off) @ 0.4 mA sourcing
Maximum Operating Common Mode Voltage (Field Term to Logic Connector)	250 V
Power Requirements:	5 VDC (±0.25) @ 25 mA nom.
Module Ratings
Number of Channels Per Module	1
Turn-on Time	8 msec typical
Turn-off Time	8 msec typical
Input-to-output Isolation (transient)	4000 V AC/DC
Temperature	0 °C to 70 °C, operating -30 °C to 85 °C, storage

Write a Review