Absolute Process Instruments API 3200 G M01 _ DC voltage input DC voltage feedback valve positioner

Write a Review

Absolute Process Instruments

Absolute Process Instruments API 3200 G M01 _ DC voltage input DC voltage feedback valve positioner

Rating Required

Name Required

Email Required

Review Subject Required

Comments Required

$319.00

Description
0 Reviews

Features:

Automatic or Manual Valve Control
Test/Manual Positioning Buttons
Input LoopTracker® LED
Relay Status LEDs
High Capacity Relay Contacts

Applications:

Valve Position Controller
Linear Actuator Controller
Damper Controller

The API 3200 G M01 controls the position of a valve or linear actuator by comparing a DC voltage control signal to that of a voltage feedback signal.

The API 3200 G M01 have heavy-duty relay contacts allow the modules to directly control high capacity loads without a secondary device.

Auto/Manual Switch

A top-accessible Auto/Manual switch allows either closed-loop automatic control of valve position or manual positioning via the Open/Close push buttons. The manual mode is useful for troubleshooting, calibration, system testing or as a manual bypass.

LoopTracker and Relay Status LEDs

API exclusive features include a LoopTracker LED that varies in intensity with changes in the input signal. Monitoring this LED can provide a quick visual picture of your process at all times and save time during initial startup and/or troubleshooting. A red/green bi-color LED visually indicates control relay status. The LED indicates green for opening, red for closing and off for neutral position.

Specifications Table:

Control Input and Feedback	0-1 V, 0-5 V, 1-5 V, 0-10 VDC(voltage input / voltage feedback)
Control Input Impedance	Voltage: 200 kÎ© min. Current: 50 Î© typical
Input Voltage Burden (Current)	1.25 VDC maximum
Common Mode Rejection	100 dB minimum
Input Calibration	Single-turn zero and span potentiometers (±10% of span adjustment range typical)
Manual Controls	Automatic/manual switch. Manual open and close buttons.
Relay Output	Relay Output SPDT relay with neutral contact position 8 A max at 240 VAC resistive load Caution: Do not exceed socket voltage rating Use an RC snubber for inductive loads
Deadband	12 turn potentiometer adjustable from 1 to 25% of span
Response Time	100 milliseconds typical
Ambient Temperature Range and Stability	-10°C to +60°C operating ambient Better than ±0.02% of span per °C stability, calculated, not tested
Housing	IP 40, requires installation in panel or enclosure API 011 or API 011 FS socket
Sockets	Socket mounts to 35 mm DIN rail or can be surface mounted
Power	115 VAC ±10%, 50/60 Hz, 2.5 W max

Write a Review