Absolute Process Instruments API 1700 G _ Frequency input single alarm

Write a Review

$339.00

Brand: Absolute Process Instruments
SKU:: API 1700 G
UPC:

Absolute Process Instruments API 1700 G _ Frequency input single alarm

Features with all optional accessories:

Current Stock:

Quantity:

Adding to cart… The item has been added

Description
0 Reviews

Absolute Process Instruments API 1700 G _ Frequency input single alarm

Features with all optional accessories:

Accepts Most Types of Pulse Signals
Field Adjustable Trip and Reset
Plug-In Design for Fast Installation
Input LoopTracker® and Alarm Status LEDs
Alarm Test, Optional Reset Button

Applications:

Machinery Speed Alarm
Redundant or Backup Alarm
Conveyor or Machine Malfunction Alarm

The API 1700 G are factory configured for a frequency input and provide alarm contact outputs. Heavy duty relay contacts allow the module to directly control high capacity loads.

The API 1700 G provides a single set point and reset point adjustment and DPDT relay contacts. The alarm output can be factory configured for HI or LO operation, non-latching or latching, normal or reverse acting. Top-accessible potentiometers are used to adjust the alarm trip and reset points.

LoopTracker and Alarm Status LEDs

API exclusive features include a LoopTracker LED that varies in intensity with changes in the frequency input signal. A red/green bi-color alarm status LED visually indicate alarm status. These LEDs provide a quick visual picture of your process at all times.

Output Test/Reset

API's exclusive functional test button can be used to verify the alarm and system operation. The output test button greatly aids in saving time during initial startup and/or troubleshooting. The HT latching option provides the additional function of unlatching the alarm when the reset button is pressed. The alarm will reset if the alarm condition not longer exists.

Specifications Table:

Input	0-10 Hz to 0-30 kHz
Output	One 8 Amp DPDT Relay or Two 8 Amp SPDT Relays
Frequency Input Range	Factory configured, please specify frequency range Minimum: 0-10 Hz Maximum: 0-30 kHz Can be zero-based or offset up to 1/3 of maximum range
Input Type	Capacitively coupled, unpowered input Accepts sine wave, sawtooth, square wave, or pulses Minimum 5 µsec pulse and 100 mV amplitude change
Input Amplitude	100 mVRMS to 150 VRMS
Input Impedance	10 kÎ© nominal (at maximum sensitivity) 100 kÎ© nominal (at minimum sensitivity)
Sensitivity/Hysteresis	Single-turn potentiometer for sensitivity adjustment Maximum sensitivity: ±25 mV typical Minimum sensitivity: ±2.5 V typical
Input Protection	Normal mode: 200% of input rating Common mode: 600 VDC or 600 VACp input to ground System voltages must not exceed socket voltage rating
Relay Output	Two SPDT form C contact sets operating in unison as one DPDT contact set: One set point, 12 turn potentiometer, 0-100% of span One reset point, 12 turn potentiometer, 0-100% of span Factory configured alarm action: Standard: HI alarm, non-latching, normal acting (failsafe) Options: LO alarm, latching, reverse acting
Relay Contact Rating	8 A at 240 VAC resistive load or 30 VDC resistive load 5 A at 240 VAC inductive load (cos f = 0.4) 3.5 A at 30 VDC inductive load (L/R = 7ms) See graph on other side for relay load ratings Caution: Do not exceed socket voltage rating. Use an RC snubber for inductive loads
Deadband	0.02% of input frequency span when reset point adjustment is not in use
Output Test Button	Toggles relay(s) to opposite state when pressed
Response Time	70 milliseconds typical
Ambient Temperature Range and Stability	-10°C to +60°C operating ambient Better than ±0.02% of span per °C stability, calculated, not tested
Housing	IP 40, requires installation in panel or enclosure API 011 or API 011 FS socket
Sockets	Socket mounts to 35 mm DIN rail or can be surface mounted
Power	115 VAC ±10%, 50/60 Hz, 2.5 W max

Write a Review