Absolute Process Instruments APD 4408 D _ Specify VDC or mADC range

$539.00

Brand: Absolute Process Instruments
SKU:: APD 4408 D
UPC:

Absolute Process Instruments APD 4408 D _ Specify VDC or mADC range

Cecomp Electronics, APD 4408 D, DC to DC Signal Condition

Current Stock:

Quantity:

Adding to cart… The item has been added

Add to Wish List

Description

0 Reviews

Absolute Process Instruments APD 4408 D _ Specify VDC or mADC range
Cecomp Electronics, APD 4408 D, DC to DC Signal Conditioner with Math Function, A-B Function, 9-30VDC/10-32VAC Power
Features:
Add, Subtract, Average, Multiply, Divide
Square Root, Square, Custom Math Function
Factory Set Custom I/O Ranges
1200 V Input/Output/Power Isolation
Input LoopTracker® LED and Functional Test Button
Built-In Loop Power Supply for Output
Applications:
Average Output From Metering Pumps
Linearize Output From Flow Meter
Output Differential Between Two Flow Meters
The APD 4408 D provide an optically isolated DC voltage or current output that is calculated from the mathematical function built in to the module.
Full 3-way isolation (input, output, power) makes this module useful for ground loop elimination, common mode signal rejection or noise pickup reduction. The inputs are not isolated from each other.
The APD 4408 D Transmitters can be wired to allow a mA output to be either sinking (passive) or sourcing (active).
LoopTracker
API exclusive features include a green LoopTracker LED that varies in intensity with changes in the process input signal. It provides a quick indication of your process input at all times and can greatly aid in saving time during initial startup and/or troubleshooting.
Functional Test
An API exclusive feature includes the Functional Test Button to provide a fixed output (independent of the input) when enabled. The test output level is potentiometer adjustable from 0 to 100% of output span. The functional test button can greatly aid in saving time during initial startup and/or troubleshooting.
Specifications Table:
Input 0-50 mV to 0-10 VDC, ±25mV to ±10VDC, 0-1 mA to 0-20 mADC, ±0.5 to ±20 mA
Output 0-1 V to ±10 VDC or 0-2 mA to 0-20 mA, 4-20 mA
Function A - B
DC Input Range Factory configured, please specify each input range. Consult factory for special ranges and/or functions. Each input can have different ranges and/or units. Specify order of math functions if required. Milliamp inputs are sinking.
Voltage: 0-50 mVDC to 0-10 VDC
Bipolar voltage: ±25 mVDC to ±10 VDC
Current: 0-1 mADC to 0-20 mADC
Bipolar current: ±0.5 mADC to ±20 mADC
Input Impedance
Voltage: 50 kÎ© minimum
Current: 50 Î© nominal
Balance Between Inputs Better than ±0.5% of span
DC Output Range Factory configured, please specify output range
Voltage, 10 mA max.: 0-1 VDC to 0-10 VDC
Bipolar voltage: ±1 VDC to ±10 VDC
Current: 0-2 mADC to 0-20 mADC, 20 V compliance, 1000 Î© at 20 mA
Milliamp output can be field wired for sink or source
Output Calibration
Multi-turn zero and span potentiometers for each output channel
±15% of span adjustment range typical
Output Loop Power Supply 20 VDC nominal, regulated, 25 mADC, <10 mVRMS max. ripple. May be selectively wired for sinking or sourcing mA output
Output Test Front button sets output to test level. Enabled via pushbutton.
Default setting approximately 50% of span
Potentiometer adjustable 0-100% of span
Output Ripple and Noise Less than ±0.2% of span
Linearity Better than ±0.25% of span
Ambient Temperature Range and Stability 10°C to +60°C operating ambientBetter than ±0.02% of span per °C stability
Response Time 50 milliseconds, nominal per channel used
Isolation 1200 VRMS minimum
Full isolation: power to each input, power to output, each input to output.
Non-isolated: input to input
Housing
IP 40, requires installation in panel or enclosure
For use in Pollution Degree 2 Environment
Mount vertically to a 35 mm DIN rail
Connectors Four 4-terminal removable connectors, 14 AWG max wire size
Power 9-30 VDC or 10-32 VAC 50/60 Hz, 4 W maximum

Write a Review

0 Reviews Hide Reviews Show Reviews

Input	0-50 mV to 0-10 VDC, ±25mV to ±10VDC, 0-1 mA to 0-20 mADC, ±0.5 to ±20 mA
Output	0-1 V to ±10 VDC or 0-2 mA to 0-20 mA, 4-20 mA
Function	A - B
DC Input Range	Factory configured, please specify each input range. Consult factory for special ranges and/or functions. Each input can have different ranges and/or units. Specify order of math functions if required. Milliamp inputs are sinking. Voltage: 0-50 mVDC to 0-10 VDC Bipolar voltage: ±25 mVDC to ±10 VDC Current: 0-1 mADC to 0-20 mADC Bipolar current: ±0.5 mADC to ±20 mADC
Input Impedance	Voltage: 50 kÎ© minimum Current: 50 Î© nominal
Balance Between Inputs	Better than ±0.5% of span
DC Output Range	Factory configured, please specify output range Voltage, 10 mA max.: 0-1 VDC to 0-10 VDC Bipolar voltage: ±1 VDC to ±10 VDC Current: 0-2 mADC to 0-20 mADC, 20 V compliance, 1000 Î© at 20 mA Milliamp output can be field wired for sink or source
Output Calibration	Multi-turn zero and span potentiometers for each output channel ±15% of span adjustment range typical
Output Loop Power Supply	20 VDC nominal, regulated, 25 mADC, <10 mVRMS max. ripple. May be selectively wired for sinking or sourcing mA output
Output Test	Front button sets output to test level. Enabled via pushbutton. Default setting approximately 50% of span Potentiometer adjustable 0-100% of span
Output Ripple and Noise	Less than ±0.2% of span
Linearity	Better than ±0.25% of span
Ambient Temperature Range and Stability	10°C to +60°C operating ambientBetter than ±0.02% of span per °C stability
Response Time	50 milliseconds, nominal per channel used
Isolation	1200 VRMS minimum Full isolation: power to each input, power to output, each input to output. Non-isolated: input to input
Housing	IP 40, requires installation in panel or enclosure For use in Pollution Degree 2 Environment Mount vertically to a 35 mm DIN rail
Connectors	Four 4-terminal removable connectors, 14 AWG max wire size
Power	9-30 VDC or 10-32 VAC 50/60 Hz, 4 W maximum

Related Products

Absolute Process Instruments

Absolute Process Instruments APD 4408 _ Specify VDC or mADC range

MSRP:

Now: $539.00

Was:

Absolute Process Instruments APD 4408 _ Specify VDC or mADC rangeCecomp Electronics, APD 4408, DC to DC Signal Conditioner with Math Function, A-B Function, 85-265 VAC, 60-300 VDC PowerFeatures:Add,...

Add to Cart The item has been added

Absolute Process Instruments

Absolute Process Instruments APD 44L3 D _ Specify VDC or mADC range

MSRP:

Now: $539.00

Was:

Absolute Process Instruments APD 44L3 D _ Specify VDC or mADC rangeCecomp Electronics, APD 44L3 D, DC to DC Signal Conditioner Low Select Function from 3 Inputs, 9-30VDC/10-32VAC...

Add to Cart The item has been added

Absolute Process Instruments

Absolute Process Instruments APD 44L2 D _ Specify VDC or mADC range

MSRP:

Now: $539.00

Was:

Absolute Process Instruments APD 44L2 D _ Specify VDC or mADC rangeCecomp Electronics, APD 44L2 D, DC to DC Signal Conditioner Low Select Function from 2 Inputs, 9-30VDC/10-32VAC...

Add to Cart The item has been added

Absolute Process Instruments

Absolute Process Instruments APD 4406 D _ Specify VDC or mADC range

MSRP:

Now: $539.00

Was:

Absolute Process Instruments APD 4406 D _ Specify VDC or mADC rangeCecomp Electronics, APD 4406 D, DC to DC Signal Conditioner with Math Function, (A+B-C)/2 Function, 9-30VDC/10-32VAC...

Add to Cart The item has been added

Absolute Process Instruments

Absolute Process Instruments APD 4402 D _ Specify VDC or mADC range

MSRP:

Now: $539.00

Was:

Absolute Process Instruments APD 4402 D _ Specify VDC or mADC rangeCecomp Electronics, APD 4402 D, DC to DC Signal Conditioner with Math Function, (A+B)/2 Function, 9-30VDC/10-32VAC...

Add to Cart The item has been added

Absolute Process Instruments

Absolute Process Instruments APD 4403 D _ Specify VDC or mADC range

MSRP:

Now: $539.00

Was:

Absolute Process Instruments APD 4403 D _ Specify VDC or mADC rangeCecomp Electronics, APD 4403 D, DC to DC Signal Conditioner with Math Function, (A+B+C-D)/3 Function, 9-30VDC/10-32VAC...

Add to Cart The item has been added

Absolute Process Instruments

Absolute Process Instruments APD 44H4 D _ Specify VDC or mADC range

MSRP:

Now: $539.00

Was:

Absolute Process Instruments APD 44H4 D _ Specify VDC or mADC rangeCecomp Electronics, APD 44H4 D, DC to DC Signal Conditioner High Select Function from 4 Inputs, 9-30VDC/10-32VAC...

Add to Cart The item has been added

Absolute Process Instruments

Absolute Process Instruments APD 4420 D _ Specify VDC or mADC range

MSRP:

Now: $539.00

Was:

Absolute Process Instruments APD 4420 D _ Specify VDC or mADC rangeCecomp Electronics, APD 4420 D, DC to DC Signal Conditioner with Math Function, A/B Function, 9-30VDC/10-32VAC PowerFeatures:Add,...

Add to Cart The item has been added

Absolute Process Instruments

Absolute Process Instruments APD 4407 D _ Specify VDC or mADC range

MSRP:

Now: $539.00

Was:

Absolute Process Instruments APD 4407 D _ Specify VDC or mADC rangeCecomp Electronics, APD 4407 D, DC to DC Signal Conditioner with Math Function, A-B-C Function, 9-30VDC/10-32VAC PowerFeatures:Add,...

Add to Cart The item has been added