AEMC Simple Logger® II Model L562
Write a Review
Aemc
AEMC Simple Logger® II Model L562
- Brand
- Aemc
- SKU:
- 2126.35
- UPC:
- 6.85E+11
AEMC L562 Description:
The AEMC L562 Simple Logger II is a two channel Volt/Amp data logger. The Extended Recording Mode (XRM) and delayed start time are just two of the many application friendly features.
The Simple Logger® II records TRMS at a rate of up to eight times per second. The measurement process is performed no more than eight times per second. TRMS calculations are performed on a single line cycle. This means that the input(s) are ignored between measurement intervals.
The main advantage of the logger is its ability to perform a variety of recording tasks with easy and intuitive setup from a computer using DataView® software.
Analog information on the input is sampled and converted to a digital signal. This digital signal is processed and stored along with scale and time information. An optically isolated Universal Serial Bus (USB) port provides for the transfer of data from the instruments internal memory to the computer for analysis.
Probes are not included and must be purchased separately.
Features
- 2 input channels
- Voltage: 0 to 600VAC TRMS
- Current: compatible with voltage output AC current probes with voltage outputs
- 64 samples per cycle
- Records Arms, Vrms & VA (VA displays in DataView® software)
- 4 user selectable storage modes
- Programmable storage rates from 8 every second to 1 every day
- Stores up to 240,000 measurements in non-volatile memory
- Powered by standard Alkaline batteries
- Lightweight, compact, fits anywhere
- 5 LED indicators quickly and clearly display logger status
- Includes FREE DataView® software for data storage, real-time display, analysis and report generation
- EN 61010-1; 300V CAT IV; 600V CAT III with a safety rated current probe attached
- Isolated USB 2.0 communication cable included
Applications
- Single phase power monitoring
- Residential, commercial, industrial troubleshooting
- Find sags and surges
- Track energy usage
AEMC L562 Specifications:
| Current Channel | |
| Input Connection | BNC |
| Input Range | 0 to 1V AC (for use with current probes with a voltage output) |
| Resolution | 0.1mV |
| Accuracy (50/60Hz) | 0 to 10mV unspecified 10 to 50mV: ±(0.5% of Reading + 1mV) 50 to 1000mV: ±(0.5% of Reading + 0.5mV) |
| Input Impedance | 800k? |
| Maximum Input Voltage | 5Vrms or ± 7.07V peak |
| Voltage Channel | |
| Input Connection | Two recessed banana jacks |
| Input Range | 0 to 600V AC |
| Resolution | 0.1V |
| Accuracy (50/60Hz) | 0 to 5V unspecified 5 to 50V: ±(0.5% of Reading + 1V) 50 to 600V: ±(0.5% of Reading + 0.5V) |
| Input Impedance | 40M? |
| Maximum Input Voltage | 1.2 x 600V |
| Electrical | |
| Sample Rate | 64 samples/cycle |
| Storage Rate | Programmable from 8 every second to 1 every day |
| Storage Modes | Start/Stop, FIFO, Extended Recording Mode (XRM) and Alarm |
| Recording Length | 15 minutes to 8 weeks, programmable using DataView® |
| Memory | 240,000 measurement (512KB) Data is stored in non-volatile memory and retained if the battery is low or removed |
| Communication | USB 2.0 optically isolated |
| Power Source | 2 x 1.5V AA-cell Alkaline batteries (included) |
| Battery Life | 100 hours to > 45 days (dependent on sample rate and recording length) |
What's included with the AEMC L562
- L562 Simple Logger II True RMS Datalogger
- USB cable
- DataView® software
- 2 x 1.5V AA alkaline batteries
- Set of leads
- Set of alligator clips
- Manual
0 Reviews Hide Reviews Show Reviews
Aemc
AEMC Simple Logger® II Model L642
Aemc
AEMC Simple Logger® II Model L261
Aemc