AEMC Megohmmeter Model 6505 (Digital, Analog Bargraph, Backlight, 500V, 1000V, 2500V, 5000V, Auto DAR/PI)

Write a Review

Aemc

AEMC Megohmmeter Model 6505 (Digital, Analog Bargraph, Backlight, 500V, 1000V, 2500V, 5000V, Auto DAR/PI)

Rating Required

Name Required

Email Required

Review Subject Required

Comments Required

$2,850.00

Brand

Aemc

SKU:

2130.18

UPC:

6.85E+11

Availability:

In Stock

Description
0 Reviews

AEMC Instruments 6505 Description:

This portable instrument is housed in a rugged field case and operates on either battery or line power that performs voltage, insulation, and capacitance measurements. This instrument contributes to the safety of electrical installations and equipment.

Displays the test voltage, insulation resistance and the leakage current during the test. Capacitance of the sample and discharge voltage present at the test leads is displayed at the conclusion of the test.

Designed with the highest level of built-in safety features. This meter incorporates test inhibit capabilities which will not allow test voltages to be generated if a live sample is detected. The test terminals are recessed to ensure operating safety.

Features

Test voltage combination of 500V, 1000V, 2500V and 5000V
Insulation measurements from 30k? to 10T?
Adjustable and programmable test voltage (40 to 5100V)
Automatic calculation of DAR and PI values
Direct measurement and display of Capacitance and Leakage Current
Display of resistance, test voltage and run time
Programmable test run times and PI ratio times
Automatic test inhibition, if live sample (>25)
Automatic discharge and display of discharge voltage
Large dual-display with time, voltage and measurements shown
Rugged dual wall weatherproof field case
Designed and built to IEC safety standards
EN 61010-1, 1000V CAT III

Applications

Test insulation on cables, transformers, motors, generators, insulators and wiring installations
High resistance or absorption tests
Spot reading tests
Timed resistance measurements
Dielectric Absorption Ratio (DAR) and Polarization Index (PI) tests
Test old or water damaged installations over long time runs
Motor insulation resistance measurements

AEMC Instruments 6505 Specifications:

Test Voltage/Range	500V: 30k? to 2000G? (2T?) 1000V: 100k? to 4000G? (4T?) 2500V: 100k? to 10,000G? (10T?) 5000V: 300k? to 10,000G? (10T?)
User Programmable Test	40 to 1000V: 10V increments 1000 to 5100V: 100V increments
Short Circuit Current	<1.6mA ± 5%
Accuracy	10k? to 40G?: ±5% of Reading ± 3cts 40G? to 10T?: ±15% of Reading ± 10cts
DAR (1 min/30 sec)	0.02 to 50.00
PI (10 min/1 min & user programmable)	0.02 to 50.00
Capacitance Measurement	0.005 to 49.99µF Max resolution 1nF
Leakage Current Measurement	0.00nA to 3mA Max resolution 1pA
Programmable Run Time R(t)	1 to 60 minutes
Discharge After Test	Yes, automatic
Discharge Voltage Display	Yes
Voltage Test/Safety Check	0 to 1000V AC/DC (16 to 420Hz) 1V Resolution

What's included with the AEMC Instruments 6505

Digital Megohmmeter
Set of 6' Leads, 5000V (Red, Blue, and Black)
Set of Alligator Clips, 600V CAT IV, (Red, Blue, and Black)
Blue Guard Terminal Jumper Lead
Fuse, 0.1A 380V
Rechargeable Battery Pack
US 115V Power Cord
Extra Large Tool Bag
Manual

Write a Review