Yokogawa PM100-E-05-P3 External Pressure Sensor for CA700 Series, 16 MPa

Yokogawa PM100-E-05-P3 External Pressure Sensor for CA700 Series, 16 MPa

The Yokogawa PM100-E-05-P3 External Pressure Sensor, 16 MPa is a pressure module which uses the same Yokogawa dPharp technology as the CA700 and EJA/EJX series pressure transmitters. The unit plugs into the top of the CA700 and extends its pressure range 70MP (10150PSI), with range switching options to increase resolution at lower ranges. This unit is compatible with CA700's firmware versions 1.20 or later. With earlier firmware versions, a simple update is needed to be able to communicate with the unit.

Product Features:

• For calibration of pressure transmitters, accurate measurement of input and output values and calculation of error rate
• Embedded calibration procedures enable users to perform certain calibration following prescribed procedure
• By connecting to CA700 Unit, users can calibrate in high pressure range
• Pressure type: Shield gauge
• Measurement Range: 0 to 7 MPa sg/0 to 10 MPa sg/0 to 16 MPa sg
• Measurement display range: to 8.4000 MPa/to 12.0000 MPa/to 19.2000 MPa
• Measurement accuracy (6 months after calibration/test after zero calibration): ± (0.01% of reading + 2 kPa)/± (0.01% of reading + 3 kPa)/± (0.01% of reading + 5 kPa)
• Measurement accuracy (1 year after calibration/test after zero calibration): ± (0.01% of reading + 2.8 kPa)/± (0.01% of reading + 3.8 kPa)/± (0.01% of reading + 5.8 kPa)
• Allowable input: 2.7 kPa abs to 23 MPa sg
• Temperature coefficient: ± (0.001% of reading + 0.16 kPa) / C degrees or less

Included:

• 1 - External Pressure Sensor, 16 Mpa, PM100-E-05-P3
• 1 - Waterproof Connection Cable (1 m)
• 1 - 1/2 in. NPT Male Thread to 1/8 in. NPT Female Thread
• 1 - 1/2 in. NPT Male Thread to 1/4 in. NPT Female Thread
• 1 - 1/2 in. NPT Male Thread to Rc 1/4 in. Female Thread