OPTO 22 - SNAP-PACLC _ SNAP PAC Learning Center

Quick Specs:

SNAP PAC Learning Center

The SNAP PAC Learning Center is a fully functional, complete package of Opto 22 hardware and software that provides everything you need to learn about Opto 22's SNAP PAC System. The Learning Center includes PAC Project Basic software, a SNAP-PAC-R1 rack-mounted controller, SNAP I/O modules and mounting rack, and a load panel with digital and analog sensors and actuators (switches, LEDs, a temperature probe, a meter, and so on).

The included step-by-step tutorial guides you through the hardware assembly and software installation and gives you hands-on programming experience with the PAC Project software. You will configure I/O points, read and write to those points, create several flowcharts as part of a control strategy, and build a graphical user interface.

Because the SNAP PAC Learning Center consists of the same field-proven, real hardware and software used by Opto 22 customers all over the world, you'll be able to apply not only the knowledge you've learned, but also the actual Learning Center hardware and software in your next automation project.

Specifications:

Included Components

- PAC Project Basic software
- SNAP-PAC-R1 controller
- SNAP-PAC-RCK8 8-position module mounting rack
- Five SNAP I/O modules (two digital, three analog)
- Learning Center load panel
- Power cable. Input voltage range for the Learning Center is 120 - 300 VAC. The appropriate power cable is included, based on your location (U.S., international, or UK); if you need a different cable, please call Opto 22 at 800-321-6786 (toll-free in the U.S.) or 951-695-3000.
- Ethernet Category 5 crossover cable
- SNAP PAC Learning Center Guide (printed)
- Complete PAC Project documentation (in PDF format)

Computer Requirements

To use the SNAP PAC Learning Center with your PC, you must have the following minimum computer configuration:

- Computer running Microsoft® Windows® 10 Professional (32-bit or 64-bit) with at least the minimum processor required for your version, and Ethernet capability.

NOTE: The following are not supported: Windows Vista(R) Business (32-bit), or Windows XP Professional (32-bit, with SP2 or higher). Microsoft Windows server, 64-bit versions of Windows Vista and XP, and embedded operating systems.

- VGA or higher resolution monitor (Super VGA recommended), minimum size 800x600 with small fonts.

- Mouse or other pointing device. Printer optional.

- Available hard disk space required: 124 MB

Write a Review