OPTO 22 - SNAP-OMR6T-C _ SNAP Isolated 4-channel Mechanical Power Relay Output Module, Form C, with Integrated Transient Suppression

Write a Review

OPTO 22

OPTO 22 - SNAP-OMR6T-C _ SNAP Isolated 4-channel Mechanical Power Relay Output Module, Form C, with Integrated Transient Suppression

Rating Required

Name Required

Email Required

Review Subject Required

Comments Required

$156.00

Brand

OPTO 22

SKU:

SNAP-OMR6T-C

Description
0 Reviews

OPTO 22 - SNAP-OMR6T-C _ SNAP Isolated 4-channel Mechanical Power Relay Output Module, Form C, with Integrated Transient Suppression

Quick Specs:

SNAP Isolated 4-channel Mechanical Power Relay Output Module
Form C
with Integrated Transient Suppression

The SNAP-OMR6T-C mechanical power relay output module offers four channels of switching for up to 250 VAC or 30 VDC, 6 amp loads. Each of the four mechanical contacts can be used as normally open or normally closed. This module includes integrated transient suppression while maintaining minimal leakage current.

Mechanical power relay output modules handle more current than any other SNAP output module and provide channel-to-channel isolation. Fusing is not provided; you must provide fusing when wiring the module.

Each contact on the SNAP-OMR6T-C can carry 6 amps. Having more than one channel on at the same time does not reduce the amount of power each channel can carry. Because channels are not polarity sensitive, each channel can switch either AC or DC power, thus potentially reducing the number of modules needed.

In solid-state SNAP AC output modules, possible leakage current might cause a load to stick ON. In contrast, these modules dramatically reduce that possibility. Leakage current for the SNAP-OMR6T-C is less than 1 microamp.

Part of the SNAP PAC System, the module mounts on a SNAP PAC rack with a SNAP PAC brain or rack-mounted controller. Analog, digital, and serial I/O modules can all be on the same rack. Such an I/O unit is also well suited for PC-based control or for use as intelligent remote I/O for an Allen-Bradley Logix PLC system.

The SNAP-OMR6T-C is compatible with all SNAP PAC brains and rack-mounted controllers, including both standard wired models and Wired+Wireless¢ models. It is also compatible with SNAP Ultimate, SNAP Ethernet, and SNAP Simple brains, as well as other SNAP brains such as the serial B3000 and the B3000-B. It can be used on both B-series and M-series mounting racks.

A similar module without transient suppression is available: the SNAP-OMR6-C. However, the SNAP-OMR6T-C is recommended for most applications, including applications with long wire runs.

NOTE: The SNAP-OMR6T-C is a drop-in replacement for the older SNAP-OMR6-A, which is obsolete.

NOTE: For very high inductive loads, additional transient protection is recommended.

Specifications:

	SNAP-OMR6-C	SNAP-OMR6T-C
Field Side Ratings (each channel)
Contact Configuration	Form C (SPDT, normally open or closed)	Form C (SPDT, normally open or closed)
Line Voltage - Range	0 - 250 VAC or 5 - 30 VDC	0 - 250 VAC or 5 - 30 VDC
Current Rating	6 amps switching @ 250 VAC / 30 VDC	6 amps switching @ 250 VAC / 30 VDC
Surge Current	6 amps	6 amps
Minimum Load	5 VDC, 10 mA	5 VDC, 10 mA
Contact Resistance	¤ 100 milliohms	¤ 100 milliohms
Leakage Current	none	< 1 microamp @ 250 VAC
Clamping Voltage (for transient suppression)	External transient suppression required	440 V nominal
Duty Cycle	-- Not applicable --	1 Hz
Switching Power	1500 VA / 144 W (DC)	1500 VA / 144 W (DC)
Peak Blocking Voltage	250 VAC @ 360 V_pk	250 VAC @ 360 V_pk
Channel-to-channel isolation	300 VAC (1500 Vtransient)	300 VAC (1500 Vtransient)
Logic Side Ratings
Pickup Voltage	1 V @ 2 mA	1 V @ 2 mA
Dropout Voltage	4 VDC	4 VDC
Control Resistance	220 ohms	220 ohms
Logic Supply Voltage	5 VDC ± 0.25 VDC	5 VDC ± 0.25 VDC
Logic Supply Current	160 mA maximum	160 mA maximum
Module Ratings
Number of Channels Per Module	4	4
Turn-on Time	8 milliseconds	8 milliseconds
Turn-off Time	8 milliseconds	8 milliseconds
Torque, hold-down screws	4 in-lb (0.45 N-m)	4 in-lb (0.45 N-m)
Torque, connector screws	Single gray connector: 5.26 in-lb (0.6 N-m) Black connectors: 1.7 in-lb (0.2 N-m)	5.26 in-lb (0.6 N-m)
Temperature	-20 to 70 °C, operating -30 to 85 °C, storage	-20 to 70 °C, operating -30 to 85 °C, storage
Agency Approvals	UL, CE, RoHS, DFARS	UL, CE RoHS, DFARS
Mechanical Life	10 x 10⁶ operations	10 x 10⁶ operations
Operational Life	30 x 10³ operations	30 x 10³ operations
Warranty	30 months	30 months

Write a Review