OPTO 22 - SNAP-OAC5-IFM _ SNAP 4-Ch Isolated 12-250 VAC Digital (Discrete) Output Module, FM Approved
Write a Review
OPTO 22
OPTO 22 - SNAP-OAC5-IFM _ SNAP 4-Ch Isolated 12-250 VAC Digital (Discrete) Output Module, FM Approved
- Brand
- OPTO 22
- SKU:
- SNAP-OAC5-IFM
OPTO 22 - SNAP-OAC5-IFM _ SNAP 4-Ch Isolated 12-250 VAC Digital (Discrete) Output Module, FM Approved
OPTO 22 - SNAP-OAC5-IFM _ SNAP 4-Ch Isolated 12-250 VAC Digital (Discrete) Output Module, FM ApprovedQuick Specs:
- SNAP 4-Ch Isolated 12-250 VAC Digital (Discrete) Output Module
- FM Approved
This module is Factory Mutual approved.
Part of the SNAP PAC System, the module mounts on a SNAP PAC rack with a SNAP PAC brain or rack-mounted controller. Analog, digital, and serial I/O modules can all be on the same rack. Such an I/O unit is also well suited for PC-based control or for use as intelligent remote I/O for an Allen-Bradley Logix PLC system, such as ControlLogix, MicroLogix, or CompactLogix.
For easier, faster wiring, see SNAP TEX cables and breakout boards.
Build your system in the SNAP I/O Configurator.
Specifications:
|
| SNAP-OAC5-FM | SNAP-OAC5-i-FM |
| Key Feature | Factory Mutual approved | Four isolated channels |
| Torque, hold-down screws | 4 in-lb (0.45 N-m) | 4 in-lb (0.45 N-m) |
| Torque, connector screws | 5.26 in-lb (0.6 N-m) | 5.26 in-lb (0.6 N-m) |
| Field Side Ratings (each channel) | ||
| Line Voltage - Range | 12 - 250 VAC | 12 - 250 VAC |
| Line Voltage - Nominal | 120/240 VAC | 120/240 VAC |
| Current Rating | 3 amps per module | 3 amps per module |
| One Cycle Surge | 80 amps peak (50/60 Hz) | 80 amps peak (50/60 Hz) |
| Minimum Load Current | 20 mA | 20 mA |
| Output Voltage Drop | 1.6 volts max.@ 0.75 amps | 1.6 volts max.@ 0.75 amps |
| Off-state Leakage at Nominal Voltage - 60 Hz | 2.5 mA @ 240 VAC | 2.5 mA @ 240 VAC |
| Peak Blocking Voltage | 500 V | 500 V |
| Operating Frequency | 25 - 65 Hz | 25 - 65 Hz |
| dV/ dt - Off-state | 200 volts/msec | 200 volts/msec |
| dV/ dt - Commutating | Snubbed for rated 0.5 power factor load | Snubbed for rated 0.5 power |
| Fuse | 250 VAC - 4A 5x20 mm | Has four isolated channels. |
| Channel-to-channel isolation | Not applicable | 300 VAC |
| Logic Side Ratings | ||
| Pickup Voltage | 4 V @ 5.5 mA | 4 V @ 5.5 mA |
| Dropout Voltage | 1 VDC | 1 VDC |
| Control Resistance | 220 ohms | 220 ohms |
| Logic Supply Voltage | 5 VDC ± 0.25 VDC | 5 VDC ± 0.25 VDC |
| Logic Supply Current | 50 mA maximum | 50 mA maximum |
| Module Ratings | ||
| Channels Per Module | 4 | 4 |
| Turn-on Time | 0.5 cycle maximum | 0.5 cycle maximum |
| Turn-off Time | 0.5 cycle maximum | 0.5 cycle maximum |
| Isolation (Field Side to Logic Side) | 4,000 volts (transient) | 4,000 volts (transient) |
| Temperature | -20 ° to 70 °C, operating | -20 ° to 70 °C, operating |
| Wire size range | 22 to 14 AWG | 22 to 14 AWG |
| Agency Approvals | CE, FM, RoHS, DFARS; UKCA | CE, FM, RoHS, DFARS; UKCA |
| Warranty | Lifetime | Lifetime |
0 Reviews Hide Reviews Show Reviews
OPTO 22
OPTO 22 - SNAP-OAC5-I _ SNAP 4-Ch Isolated 12-250 VAC Digital (Discrete) Output Module
OPTO 22
OPTO 22 - SNAP-OAC5 _ SNAP 4-Ch 12-250 VAC Digital (Discrete) Output Module
OPTO 22
OPTO 22 - SNAP-ODC5A-IFM _ SNAP 4-Ch Isolated 5-200 VDC Digital (Discrete) Output Module, FM Approved
OPTO 22
OPTO 22 - SNAP-ODC5-IFM _ SNAP 4-Ch Isolated 5-60 VDC Digital (Discrete) Output Module, FM Approved
OPTO 22