OPTO 22 - SNAP-AOV-27 _ SNAP 2-Ch -10 to +10VDC Bipolar Analog Voltage Output Module
- Brand
- OPTO 22
- SKU:
- SNAP-AOV-27
OPTO 22 - SNAP-AOV-27 _ SNAP 2-Ch -10 to +10VDC Bipolar Analog Voltage Output Module
OPTO 22 - SNAP-AOV-27 _ SNAP 2-Ch -10 to +10VDC Bipolar Analog Voltage Output ModuleQuick Specs:
- SNAP 2-Ch -10 to +10VDC Bipolar Analog Voltage Output Module
Part of the SNAP PAC System, the module mounts on a SNAP PAC rack with a SNAP PAC brain or rack-mounted controller. Analog, digital, and serial I/O modules can all be on the same rack. Such an I/O unit is also well suited for PC-based control or for use as intelligent remote I/O for an Allen-Bradley Logix PLC system, such as ControlLogix, MicroLogix, or CompactLogix.
Specifications:
| Input | 12-bit serial data |
| Outputs | -10 to +10 Volts DC |
| Span | 20 Volts |
| Resolution | 4.88 mV |
| Response Time | 99.9%/19.98 V/3 mS |
| DC Common Mode Rejection | >-120 dB |
| AC Common Mode Rejection | >-120 dB @ 60 Hz |
| Maximum Operating Common Mode Voltage | 250 V |
| Common Mode Resistance | >1,000 Megohms |
| Load Current (nominal) | 5 mA (each channel) |
| Short Circuit Output Current Continuous | 40 mA per channel |
| Accuracy | 0.1% of Span |
| Gain Temperature Coefficient | 50 PPM/°C |
| Offset Temperature Coefficient | 20 PPM/°C |
| Power Requirements | 5 Volts DC (±0.15) |
| Ambient Temperature: | -20 °C to 70 °C |
| Humidity | 5-95%, non-condensing |
| Torque, hold-down screws | 4 in-lb (0.45 N-m) |
| Torque, connector screws | 5.26 in-lb (0.6 N-m) |
| Wire size range | 22 to 14 AWG |
| Agency Approvals | UL, CE, FM, RoHS, DFARS; UKCA |
| Warranty | Lifetime |