OPTO 22 - SNAP-AITM-4i _ SNAP 4-Ch Isolated Type B, C, D, E, G, J, K, N, R, S, or T Thermocouple or or +/-150, +/-75, +/-50, or +/-25 mV Analog Input Module
- Brand
- OPTO 22
- SKU:
- SNAP-AITM-4i
OPTO 22 - SNAP-AITM-4i _ SNAP 4-Ch Isolated Type B, C, D, E, G, J, K, N, R, S, or T Thermocouple or or +/-150, +/-75, +/-50, or +/-25 mV Analog Input Module
OPTO 22 - SNAP-AITM-4i _ SNAP 4-Ch Isolated Type B, C, D, E, G, J, K, N, R, S, or T Thermocouple or or +/-150, +/-75, +/-50, or +/-25 mV Analog Input ModuleQuick Specs:
- SNAP 4-Ch Isolated Type B
- C
- D
- E
- G
- J
- K
- N
- R
- S
- or T Thermocouple or or +/-150
- +/-75
- +/-50
- or +/-25 mV Analog Input Module
The module provides optical isolation, transformer isolation, and channel-to-channel isolation. Since the four channels on the module do not share any common connections, grounded sensors and field devices may be used with them.
SNAP-AITM-4i requires SNAP PAC racks, a SNAP PAC brain or R-series controller with firmware 9.1 or newer, and PAC Project 9.1 or newer.
For a similar module with just 2 channels, see the SNAP-AITM-i.
If you don't need channel-to-channel isolation, see the SNAP-AITM or the 8-channel SNAP-AITM-8.
Build your system in the SNAP I/O Configurator.
Specifications:
| Input Range | From -150 mV to +150 mVDC | |||
| Maximum Over Range | ± 10% | |||
| Resolution | 6 µV from -150 mV to +150 mV | |||
| Cold Junction Temperature Compensation | Automatic when used with SNAP PAC brains | |||
| Input Filtering | -3 dB @ 5 Hz | |||
| Data Freshness | mV input: 75 ms Thermocouple input: 140 ms | |||
| DC Common Mode Rejection | >-120 dB | |||
| AC Common Mode Rejection | >-120 dB @ 60 Hz | |||
| Maximum Survivable Input | ±15 volts | |||
| Maximum Operating | 250 V | |||
| Accuracy | 0.06% (90 µV) @ 150 mV (full scale) | |||
| Drift: Gain Temperature | 5 µV / °C | |||
| Drift: Offset Temperature Coefficient | 2 µV / °C | |||
| Thermocouple Accuracy [°C] | B,R,S | C,D,G | E,J,K | N,T |
| From factory | ±5.0 | ±4.0 | ± 2.0 | ±3.0 |
| After user gain and offset commands | ±3.0 | ±2.0 | ± 0.8 | ±2.0 |
| Isolation: Transformer | 1500 V | |||
| Isolation: Channel to Channel | 250 V continuous | |||
| Power Requirements | 5 VDC (±0.15 ) @ 150 mA | |||
| Input Resistance | 100 megohms (each channel) | |||
| Ambient Temperature: | -20 °C to 70 °C | |||
| Humidity | 5-95%, non-condensing | |||
| Torque, hold-down screws | 4 in-lb (0.45 N-m) | |||
| Torque, connector screws | 3 in-lb (0.34 N-m) | |||
| Agency Approvals | CE, RoHS, DFARS; UKCA | |||
| Warranty | Lifetime | |||