OPTO 22 - SNAP-AITM-2 _ SNAP 2-Ch Type B,C,D,G,N,T,R, or S Thermocouple Analog Input Module
- Brand
- OPTO 22
- SKU:
- SNAP-AITM-2
OPTO 22 - SNAP-AITM-2 _ SNAP 2-Ch Type B,C,D,G,N,T,R, or S Thermocouple Analog Input Module
OPTO 22 - SNAP-AITM-2 _ SNAP 2-Ch Type B,C,D,G,N,T,R, or S Thermocouple Analog Input ModuleQuick Specs:
- SNAP 2-Ch Type B
- C
- D
- G
- N
- T
- R
- or S Thermocouple Analog Input Module
Part of the SNAP PAC System, the module mounts on a SNAP PAC rack with a SNAP PAC brain or rack-mounted controller. Analog, digital, and serial I/O modules can all be on the same rack. Such an I/O unit is also well suited for PC-based control or for use as intelligent remote I/O for an Allen-Bradley Logix PLC system, such as ControlLogix, MicroLogix, or CompactLogix.
For a similar module offering eight channels, see SNAP-AITM-8.
For a similar module with channel-to-channel isolation, see SNAP-AITM-i.
Build your system in the SNAP I/O Configurator.
Specifications:
Input Range | From -50 mV to +50 mVDC | ||
Over-range Limits | From -55 to +55 mV | ||
Resolution | 2 microvolts from -50 mV to +50 mV | ||
Cold Junction Temperature Compensation | Automatic when used with SNAP brains | ||
Input Filtering | -3 dB @ 2.4 Hz | ||
Input Response Time | 63.2%/31.5 mV/66 ms | ||
Data Freshness (Max) | 167 ms (+/- 50 mV) | ||
DC Common Mode Rejection | >-120 dB | ||
AC Common Mode Rejection | >-120 dB @ 60 Hz | ||
Maximum Survivable Input | ±15 volts | ||
Maximum Operating Common Mode Voltage | 250 V | ||
Accuracy at Full Scale | 0.1% (50 microvolts) @ 50 mV | ||
Drift: Gain Temperature Coefficient | 5 microvolts / °C | ||
Drift: Offset Temperature Coefficient | 2 microvolts / °C | ||
Thermocouple Accuracy [°C] | B, R, S | C, D, G | T, N |
From factory | ±5 | ±4 | ±3 |
After user gain and offset commands | ±3 | ±2 | ±2 |
Isolation | 1500 V | ||
Power Requirements | 5 VDC (±0.15 ) @ 170 mA | ||
Input Resistance | 100 Megohms (each channel) | ||
Ambient Temperature: | -20 °C to 70 °C | ||
Humidity | 5-95%, non-condensing | ||
Agency Approvals | FM, CE, RoHS, DFARS | ||
Torque, hold-down screws | 4 in-lb (0.45 N-m) | ||
Torque, connector screws | 3 in-lb (0.34 N-m) | ||
Agency Approvals | FM, CE, RoHS, DFARS; UKCA | ||
Warranty | Lifetime |