OPTO 22 - SNAP-AIRATE-HFi _ SNAP Isolated 2-Ch Analog Frequency Input, 2 Hz to 500 kHz or 20 Hz to 500 kHz
- Brand
- OPTO 22
- SKU:
- SNAP-AIRATE-HFi
OPTO 22 - SNAP-AIRATE-HFi _ SNAP Isolated 2-Ch Analog Frequency Input, 2 Hz to 500 kHz or 20 Hz to 500 kHz
OPTO 22 - SNAP-AIRATE-HFi _ SNAP Isolated 2-Ch Analog Frequency Input, 2 Hz to 500 kHz or 20 Hz to 500 kHzQuick Specs:
- SNAP Isolated 2-Ch Analog Frequency Input
- 2 Hz to 500 kHz or 20 Hz to 500 kHz
Nine volts through a 3.6 kOhm pull-up resistor is provided internally for each channel for use with devices that have open-collector outputs. This feature eliminates the need for you to provide the pull-up voltage supply and associated wiring, barrier strips, and so on. The module works with TTL, CMOS, and open-collector outputs.
All SNAP analog modules are transformer isolated as well as optically isolated from all other modules and from the I/O processor. In addition, this module provides channel-to-channel isolation. Since the two channels do not share any common connections, grounded sensors and field devices may be used with them.
The SNAP-AIRATE-HFi mounts on a SNAP PAC rack and works with all SNAP PAC rack-mounted controllers and brains with SNAP PAC firmware version 9.3e or higher.
Specifications:
Input Range | 2 Hz - 500 kHz at 1.0 s Data Freshness |
Input Voltage Range | 3.0 V to 48 Vp-p |
Input Impedance | 55 kOhms |
Input Coupling | Single-ended AC |
Pull-up Voltage | 6 to 9 VDC |
Pull-up Resistor | 3.6 kOhm |
Minimum Pulse Width | 1 microsecond |
Data Freshness* | 0.1 s at 20 Hz - 500 kHz |
Resolution (Hz) | f / (48,000,000 * Data Freshness), where f is the current frequency measurement |
Accuracy (at 1.0 s Data Freshness) | +- 0.005% of input for input greater than 500 Hz |
Maximum Operating Common Mode Voltage | 250 V Continuous |
DC Common Mode Rejection | > -120 dB |
AC Common Mode Rejection | > -120 dB at 60 Hz |
Isolation: Channel to Channel | 250 V Continuous |
Power Consumption | 1.05 W (210 mA @ 5 V) |
Ambient Temperature | -20 to 70 °C |
Humidity | 5-95%, non-condensing |
Torque, hold-down screws | 4 in-lb (0.45 N-m) |
Torque, connector screws | 5.26 in-lb (0.6 N-m) |
Wire size range | 22 to 14 AWG |
Agency Approvals | CE, RoHS, DFARS; UKCA |
Warranty | Lifetime |
* User selectable. Default is 0.1 seconds. |