OPTO 22 - SNAP-AIRATE _ SNAP 2-Ch 0-25,000 Hz Analog Rate Input Module
- Brand
- OPTO 22
- SKU:
- SNAP-AIRATE
OPTO 22 - SNAP-AIRATE _ SNAP 2-Ch 0-25,000 Hz Analog Rate Input Module
OPTO 22 - SNAP-AIRATE _ SNAP 2-Ch 0-25,000 Hz Analog Rate Input ModuleQuick Specs:
- SNAP 2-Ch 0-25
- 000 Hz Analog Rate Input Module
Part of the SNAP PAC System, the module mounts on a SNAP PAC rack with a SNAP PAC brain or rack-mounted controller. Analog, digital, and serial I/O modules can all be on the same rack. Such an I/O unit is also well suited for PC-based control or for use as intelligent remote I/O for an Allen-Bradley Logix PLC system, such as ControlLogix, MicroLogix, or CompactLogix.
Also see the SNAP-AIRATE-HFi.
Build your system in the SNAP I/O Configurator.
Specifications:
Nominal Input Range | 0 to 25,000 Hz |
Input Over-Range | To 27,500 Hz |
Resolution | 1 Hz |
Input Response Time(% of span / delta Hz / delta time) | 10.0% / 2,500 Hz / 0.1 sec |
Data Freshness (Max) | 126 ms |
DC Common Mode Rejection | > -120 dB |
AC Common Mode Rejection | > -120 dB at 60 Hz |
Maximum Operating Common Mode Voltage | 250 V |
Accuracy (% full scale) | ±4 Hz or ±0.5% of the input frequency (whichever is greater) |
Drift: Gain Temperature Coefficient | 200 ppm / °C |
Drift: Offset Temperature Coefficient | 50 ppm / °C |
Input Coupling | Single-ended AC (capacitor coupled) |
Input Amplitude | 2.5 V to 24 V p-p |
Minimum Pulse Width | 18 microseconds |
Input Impedance (Inputs share the same reference point.) | 50 K ohms AC coupled |
Isolation | 1500 V |
Power Requirements | 5 VDC (±0.15 V) at 190 mA |
Operating Temperature | -20 °C to 70 °C |
Storage Temperature | -40 °C to 85 °C |
Humidity | 5-95%, non-condensing |
Wire size | 22 to 14 AWG |
Torque, hold-down screws | 4 in-lb (0.45 N-m) |
Torque, connector screws | 5.26 in-lb (0.6 N-m) |
Agency Approvals | UL, FM, CE, RoHS, DFARS; UKCA |
Warranty | Lifetime |