OPTO 22 - SNAP-AIMA2-i _ SNAP 2-Ch Isolated -1 mA to +1 mA Analog Current Input Module
- Brand
- OPTO 22
- SKU:
- SNAP-AIMA2-i
OPTO 22 - SNAP-AIMA2-i _ SNAP 2-Ch Isolated -1 mA to +1 mA Analog Current Input Module
OPTO 22 - SNAP-AIMA2-i _ SNAP 2-Ch Isolated -1 mA to +1 mA Analog Current Input ModuleQuick Specs:
- SNAP 2-Ch Isolated -1 mA to +1 mA Analog Current Input Module
Part of the SNAP PAC System, the module mounts on a SNAP PAC rack with a SNAP PAC brain or rack-mounted controller. Analog, digital, and serial I/O modules can all be on the same rack. Such an I/O unit is also well suited for PC-based control or for use as intelligent remote I/O for an Allen-Bradley Logix PLC system, such as ControlLogix, MicroLogix, or CompactLogix.
Build your system in the SNAP I/O Configurator.
Specifications:
Input Range | -1 mA to +1 mA |
Maximum Over Range | ±10% (=± 27500 counts) |
Resolution | 0.04 µA |
Input Response Time | 99.9 %/19.9 µA/10 ms |
Data Freshness | 11 ms |
DC Common Mode Rejection | >-120 dB |
AC Common Mode Rejection | >-120 dB @ 60 Hz |
Maximum Survivable Input | 11 mA or 28 VDC |
Maximum Operating Common Mode Voltage | 250 V |
Accuracy | 0.05% (0.05 µA) |
DRIFT: Gain Temperature Coefficient | 30 PPM/ °C |
DRIFT: Offset Temperature Coefficient | 15 PPM/ °C |
Isolation: Optical | 4000 V |
Isolation: Transformer | 1500 V |
Isolation: Channel to Channel | 250 V continuous |
Power Requirements | 5 VDC (±0.15 V) at 200 mA |
Input Resistance | 5 K ohms (each channel) |
Ambient Temperature: | -20 °C to 70 °C |
Humidity | 5-95%, non-condensing |
Torque, hold-down screws | 4 in-lb (0.45 N-m) |
Torque, connector screws | 5.26 in-lb (0.6 N-m) |
Wire size range | 22 to 14 AWG |
Agency Approvals | CE, RoHS, DFARS |
Warranty | Lifetime |