OPTO 22 - SNAP-AIMA-8 _ SNAP 8-Ch -20mA to +20mA Analog Current Input Module

Write a Review

$480.00

Brand: OPTO 22
SKU:: SNAP-AIMA-8
UPC:

OPTO 22 - SNAP-AIMA-8 _ SNAP 8-Ch -20mA to +20mA Analog Current Input Module

Quick Specs:

Current Stock:

Quantity:

Adding to cart… The item has been added

Description
0 Reviews

OPTO 22 - SNAP-AIMA-8 _ SNAP 8-Ch -20mA to +20mA Analog Current Input Module

Quick Specs:

SNAP 8-Ch -20mA to +20mA Analog Current Input Module

The SNAP-AIMA-8 provides eight channels of -20 mA to +20 mA current input. The module does not supply loop excitation current. Although the eight channels are not isolated from each other, the module is transformer isolated and optically isolated from other modules and devices.

Part of the SNAP PAC System, the module mounts on a SNAP PAC rack with a SNAP PAC brain or rack-mounted controller. Analog, digital, and serial I/O modules can all be on the same rack. Such an I/O unit is also well suited for PC-based control or for use as intelligent remote I/O for an Allen-Bradley Logix PLC system, such as ControlLogix, MicroLogix, or CompactLogix.

Compatibility: This module can be used only with SNAP PAC R-series controllers, SNAP PAC EB-series Ethernet brains, and SNAP PAC SB-series serial brains.

NOTE: This module does not provide channel-to-channel isolation. If you need an isolated module, see the two-channel SNAP-AIMA-i module.

Build your system in the SNAP I/O Configurator.

Specifications:

Input Range	-20 mA to +20 mA
Over-Range Limits	From -22 to +22 mA (+/-20 mA range)
Resolution	0.8 microamps
Data Freshness (Max)	0.28 seconds
DC Common Mode Rejection	>-120 dB
AC Common Mode Rejection	>-120 dB @ 60 Hz
Maximum Survivable Input	36 mA or 9 VDC
Maximum Operating Common Mode Voltage	250 V
Accuracy	0.05% (10 microamps)
DRIFT: Gain Temperature Coefficient	30 PPM/ °C
DRIFT: Offset Temperature Coefficient	15 PPM/ °C
Isolation	1500 V
Power Requirements	5 VDC (±0.15 ) @ 170 mA
Input Resistance - Single Ended	100 ohms (all channels share the same reference point)
Operating Temperature	-20 °C to 70 °C
Storage Temperature	-40 °C to 85 °C
Humidity	5-95%, non-condensing
Torque, hold-down screws	4 in-lb (0.45 N-m)
Torque, connector screws	1.7 in-lb (0.19 N-m)
Agency Approvals	CE, RoHS, DFARS
Warranty	Lifetime

Write a Review