OPTO 22 - OAC5Q _ Quad Pak 4-channel AC Output 12-280 VAC, 5 VDC Logic
Write a Review
OPTO 22
OPTO 22 - OAC5Q _ Quad Pak 4-channel AC Output 12-280 VAC, 5 VDC Logic
- Brand
- OPTO 22
- SKU:
- OAC5Q
OPTO 22 - OAC5Q _ Quad Pak 4-channel AC Output 12-280 VAC, 5 VDC Logic
OPTO 22 - OAC5Q _ Quad Pak 4-channel AC Output 12-280 VAC, 5 VDC LogicQuick Specs:
- Quad Pak 4-channel AC Output 12-280 VAC
- 5 VDC Logic
The OAC5Q is a 4-channel AC digital output module used for controlling or switching AC loads of 12-280 VAC. It uses 5 VDC logic and is compatible with Opto 22 Optomux, Pamux, and Mistic protocol brain boards and mounting racks, as well as racks using a direct cable connection to a computer. This module can also be used with a Raspberry Pi, the Digital I/O Carrier Board (part number OPTO-P1-40P), and the PB16HQ mounting rack.
Quad Pak modules contain the equivalent of four single-channel I/O circuits in a single package. Each Quad Pak module can be divided into two pairs, with each pair sharing a common connection.
Quad Pak modules plug into Quad Pak I/O mounting racks. They are not compatible with single-channel racks or SNAP racks.
AC output modules are used for controlling or switching AC loads. Each module provides up to 4,000 Vrms of optical isolation between the field devices and the control logic. The Quad Pak AC output module features zero voltage turn-on and zero current turn-off.
Specifications:
OAC5Q
| Line Voltage - Nominal | 120/240 VAC |
| Operating Voltage Range | 12-280 VAC |
| Current Rating (per channel) |
|
| One Cycle Surge | 80 amps |
| Logic Voltage - Nominal | 5 VDC |
| Logic Voltage Range (Vcc) | 4-8 VDC |
| Logic Pickup Voltage | 4.0 VDC |
| Logic Dropout Voltage | 2.3 VDC |
| Logic Input Current | 12 mA |
| Control Resistance (Rc in Schematic Diagram) | 220 ohms |
| Peak Repetitve Voltage | 500 volts |
| Operating Ambient Temperature | -30 to 70 °C |
| Isolation Input-to-Output | 4,000 Vrms |
| Minimum Load Current | 20 milliamps |
| Operating Frequency | 25-65 Hz |
| Turn-on Time | 1/2 cycle maximum-zero voltage |
| Turn-off Time | 1/2 cycle maximum-zero current |
| DV/DT-Off-state | snubbed for rated 0.5 power factor load |
| Output VOltage Drop Maximum Peak | 1.6 volts |
| Off-state Leakage | 5 milliamps, ms |
0 Reviews Hide Reviews Show Reviews
OPTO 22
OPTO 22 - IAC5AQ _ Quad Pak 4-channel AC/DC Input 180-280 VAC/VDC, 5 VDC Logic
OPTO 22
OPTO 22 - IAC5Q _ Quad Pak 4-channel AC/DC Input 90-140 VAC/VDC, 5 VDC Logic
OPTO 22
OPTO 22 - ODC5Q _ Quad Pak 4-channel DC Output 5-60 VDC, 5 VDC Logic
OPTO 22
OPTO 22 - G4OAC5A _ G4 AC Output 24-280 VAC, 5 VDC Logic
OPTO 22