OPTO 22 - LED-SPCV-LV100W _ Networkable Constant Voltage LED Dimmer, Serial Modbus/DMX, Pushbutton, Rated 100W Low Voltage (12/24 V)
Write a Review
OPTO 22
OPTO 22 - LED-SPCV-LV100W _ Networkable Constant Voltage LED Dimmer, Serial Modbus/DMX, Pushbutton, Rated 100W Low Voltage (12/24 V)
- Brand
- OPTO 22
- SKU:
- LED-SPCV-LV100W
OPTO 22 - LED-SPCV-LV100W _ Networkable Constant Voltage LED Dimmer, Serial Modbus/DMX, Pushbutton, Rated 100W Low Voltage (12/24 V)
OPTO 22 - LED-SPCV-LV100W _ Networkable Constant Voltage LED Dimmer, Serial Modbus/DMX, Pushbutton, Rated 100W Low Voltage (12/24 V)Quick Specs:
- Networkable Constant Voltage LED Dimmer
- Serial Modbus/DMX
- Pushbutton
- Rated 100W Low Voltage (12/24 V)
Used alone or together, this compact dimmer is suited for applications involving LED color mixing, stage or accent lighting, step or path marking, facade or wall lighting, or any other use that requires variable light from LEDs.
Use the Network LED Dimmer to control LEDs either manually or through standard RS-485 serial protocolsincluding DMX512-A, Modbus/ASCII, and Optomuxand incorporate lighting control into existing building, automation, and lighting control systems.
To help you easily configure an Opto 22 Network LED controller or read the current configuration of your Opto 22 LED controller, use these interactive demos (designed for use on a mobile device):
Specifications:
| Nominal Input Voltage | 12 or 24 VDC (Full range: 9 - 30 VDC) |
| Operating Current | 20 mA @ 12 V, 0% duty cycle |
| Max. Output Power* | 100 W @ 12 V: 8 A @ 50 °C ambient |
| On-board Fuse | 10 A automotive mini fuse (red) |
| Torque Specs | Recommended for 6-position screw connector: 6 in.-lb. (0.678 N-m) |
| External Pushbutton Excitation | Open Circuit Voltage: 8 VDC Typical (P.B. open) |
| Protocols | DMX512-A, Modbus ASCII, Optomux |
| Serial Communication Link | 1 RS-485 (shielded twisted-pair, 2 pair: one pair for data, one for common) port with duplicate terminal positions for easy daisy chaining |
| Max. Turnaround Delay | 12 microseconds (Modbus and Optomux only) |
| Max. Dimmers on Link | 124 Opto 22 Network LED Dimmers |
| Max. Distance | 1000 feet (304.8 m.) at 115,200; 500 feet (152.4 m.) at 250,000 |
| Selectable Data Rates (Baud) | DMX: 250,000 |
| Address Range | DMX: 1 - 512 |
| Termination and Biasing*** | Set DIP switch (inside case) if Dimmer is at the physical end of the link. Biasing must be supplied by master for the RS-485 link. |
| LEDs | TX/RX: Green = TX; Red = RX |
| PWM Frequency | 244 Hz |
| PWM Period | 4.2 milliseconds |
| PWM Resolution | Brightness commands are 8-bit logarithmic curve; duty cycle commands are |
| Max. Number of Ramp Steps | 256 using logarithmic brightness curve; 32,768 if writing linear duty cycle |
| Ramp Time Parameter | (Optomux and Modbus protocols only) User selectable with range from 0 - 255 |
| Operating Temperature | -20 to +70 °C |
| Storage Temperature | -20 to +85 °C |
| Humidity | 0 - 95% humidity, non-condensing |
| Agency Approvals | CE, RoHS, UKCA |
| Warranty | 30 months |
| *For rated power, mount to a flat, thermally conductive surface (steel, aluminum). | |
0 Reviews Hide Reviews Show Reviews
OPTO 22
OPTO 22 - GRV-IV-24 _ Analog voltage input, 24 channels, 8 configurable input ranges from +/-160 V to +/-1.25 V
OPTO 22
OPTO 22 - E1 _ 16-channel Digital Optomux Brain Board for Serial and Ethernet Networks
OPTO 22
OPTO 22 - E2 _ 16-channel Analog Optomux Brain Board for Serial and Ethernet Networks
OPTO 22
OPTO 22 - G4IDC5-SWNC _ G4 DC Input - DC voltage, self-powered, normally closed
OPTO 22