OPTO 22 - G4OAC15A _ G4 AC Output 24-280 VAC, 15 VDC Logic
Write a Review
OPTO 22
OPTO 22 - G4OAC15A _ G4 AC Output 24-280 VAC, 15 VDC Logic
- Brand
- OPTO 22
- SKU:
- G4OAC15A
- UPC:
OPTO 22 - G4OAC15A _ G4 AC Output 24-280 VAC, 15 VDC Logic
Quick Specs:
- G4 AC Output 24-280 VAC
- 15 VDC Logic
OPTO 22 - G4OAC15A _ G4 AC Output 24-280 VAC, 15 VDC Logic
Quick Specs:
- G4 AC Output 24-280 VAC
- 15 VDC Logic
The G4OAC15A is a digital AC output module with an output voltage range of 24-280 VAC, requiring a typical logic voltage of 15 VDC. It is not for use with Opto 22 brains or with a Raspberry Pi, which use 5 VDC logic.
This AC output module is equivalent to a single-pole, single-throw, normally open contact (Form A, SPST-NO). It includes a 4 amp fast-blow fuse.
Opto 22's G4 AC output modules are used to control or switch AC loads. Each module provides up to 4000 volts of optical isolation (transient) between field outputs and the control side of the circuit, and each features zero voltage turn-on and zero current turn-off.
Typical applications for AC output modules include switching loads such as AC relays, solenoids, motor starters, heaters, lamps, and indicators.
Specifications:
| Units | G4OAC15*** | G4OAC15A*** | G4OAC24*** | G4OAC24A*** |
Nominal line voltage | VAC | 120 | 120/240 | 120 | 120/240 |
Output voltage range | VAC | 12 - 140 | 24 - 280 | 12 - 140 | 24 - 280 |
Key feature | |||||
Current rating: | A | 3 | 3 | 3 | 3 |
UL Motor Load Rating | A | 1.5 | 1.5 | 1.5 | 1.5 |
Isolation input-to-output (transient): 1 ms 1 minute | volts |
4000 1500 |
4000 1500 |
4000 1500 |
4000 1500 |
Off-state leakage at nominal voltage (60 Hz) | mARMS | 5 | 1.25/2.5 | 5 | 1.25/2.5 |
Logic voltage range | VDC | 10.5 - 16 | 10.5 - 16 | 19.5 - 32 | 19.5 - 32 |
Logic pickup voltage | VDC | 10.5 | 10.5 | 19.5 | 19.5 |
Logic dropout voltage | VDC | 1 | 1 | 1 | 1 |
Logic input current at nominal logic voltage | mA | 15 | 15 | 18 | 18 |
Control resistance | ohms | 1 K | 1 K | 2.2 K | 2.2 K |
One-cycle surge | A peak | 80 | 80 | 80 | 80 |
Turn-on time @ 60 Hz | micro- seconds | ¤8.3* | ¤8.3* | ¤8.3* | ¤8.3* |
Turn-off time @ 60 Hz | micro- seconds | ¤8.3** | ¤8.3** | ¤8.3** | ¤8.3** |
Peak repetitive voltage | VAC | 500 | 500 | 500 | 500 |
Minimum load current | mA | 20 | 20 | 20 | 20 |
Output voltage drop maximum peak | V | 1.6 | 1.6 | 1.6 | 1.6 |
Operating frequency | Hz | 25 - 65 | 25 - 65 | 25 - 65 | 25 - 65 |
dV/dT-off-state | V/micro- second | 200 | 200 | 200 | 200 |
dV/dT-commutating | -- | snubbed for 0.5 power factor load | snubbed for 0.5 power factor load | snubbed for 0.5 power factor load | snubbed for 0.5 power factor load |
Temperature | °C | -30 to +70 | -30 to +70 | -30 to +70 | -30 to +70 |
* One-half cycle maximum. Module turns on at the zero volt crossing of the AC sine wave. |
0 Reviews Hide Reviews Show Reviews
OPTO 22
OPTO 22 - G4OAC24A _ G4 AC Output 24-280 VAC, 24 VDC Logic
OPTO 22
OPTO 22 - G4OAC5A _ G4 AC Output 24-280 VAC, 5 VDC Logic
OPTO 22
OPTO 22 - G4OAC5A5 _ G4 AC Output, 24-280 VAC, 5 VDC Logic, Normally Closed
OPTO 22
OPTO 22 - G4OAC24AMA _ G4 AC OUTPUT 12-280 VAC, 24 VDC LOGIC WITH HOA/SW
OPTO 22
OPTO 22 - OAC15A _ G1 AC Digital Output, 24-280 VAC, 15 VDC Logic
OPTO 22
OPTO 22 - G4IAC15A _ G4 AC Input 180-280 VAC/VDC, 15 VDC Logic
OPTO 22
OPTO 22 - G4IAC24A _ G4 AC Input 190-280 VAC/VDC, 24 VDC Logic
OPTO 22
OPTO 22 - G4OAC5AFM _ G4 AC Output 24-280 VAC, 5 VDC Logic, Factory Mutual Approved
OPTO 22