OPTO 22 - G4IDC5MA _ G4 DC Input 10-32 VDC, 5 VDC Logic with Manual/Auto Switch
- Brand
- OPTO 22
- SKU:
- G4IDC5MA
OPTO 22 - G4IDC5MA _ G4 DC Input 10-32 VDC, 5 VDC Logic with Manual/Auto Switch
Quick Specs:
- G4 DC Input 10-32 VDC
- 5 VDC Logic with Manual/Auto Switch
The G4IDC5MA is a digital DC input module with an input voltage range of 10-32 VDC (or 12-32 VAC), requiring a typical logic voltage of 5 VDC. This module is compatible with Opto 22 brains and with a Raspberry Pi.
The G4IDC5MA features a manual-on/manual-off/automatic switch, ideal for diagnostic testing of control applications.
This module is designed with filtering on the input and a hysteresis amplifier, providing high noise rejection and transient-free, "clean" switching.
Opto 22's G4 DC input modules are used to detect on/off DC voltage levels. Each module provides up to 4000 volts (transient) of optical isolation between field inputs and the logic output of the circuit. Typical applications for DC input modules include sensing the presence or absence of voltage and sensing contact closure from sources such as proximity switches, limit switches, selector switches, push buttons, photoelectric switches, and TTL-compatible devices.
Compatible with Raspberry Pi. The G4IDC5MA can be used with the Digital I/O Carrier Board for Raspberry Pi® (part number OPTO-P1-40P) to monitor and control industrial devices with your Raspberry Pi.
Specifications:
| Units | G4IDC5K | G4IDC5MA* | G4IDC15** | G4IDC24** |
Input voltage range | VDC | 2.5 - 16 | 10 - 32 | 10 - 32 | 10 - 32 |
Key feature |
| Highest | Diagnostic | ||
Input current at maximum line | mA | 30 | 25 | 25 | 25 |
Isolation, input-to-output (transient): | V | 4000 | 4000 | 4000 | 4000 |
Turn-on time | ms | 0.025*** | 5 | 5 | 5 |
Turn-off time | ms | 0.025*** | 5 | 5 | 5 |
Input allowed for off-state | mA, V | 0.2, 1 | 1, 3 | 1, 3 | 1,3 |
Nominal output supply voltage | VDC | 5 | 5 | 15 | 24 |
Output supply voltage range | VDC | 4.5 - 6 | 4.5 - 6 | 12 - 18 | 20 - 30 |
Output supply current at | mA | 12 | 12 | 15 | 18 |
Input resistance (R1 in schematic) | ohms | 500 | 1.5 K | 1.5 K | 1.5 K |
Control resistance (Rc in schematic) | ohms | 220 | 220 | 1 K | 2.2 K |
Output voltage drop | V @ 50 mA | 0.4 | 0.4 | 0.4 | 0.4 |
Output current (sinking) | mA | 50 | 50 | 50 | 50 |
Output leakage with no input | microamps @ 30 VDC | 100 | 100 | 100 | 100 |
Transistor | V breakdown | 30 | 30 | 30 | 30 |
Temperature: Storage | °C | - 30 to +70 | - 30 to +70 | - 30 to +70 | - 30 to +70 |
* Compatible with Raspberry Pi. |