OEL Safety _ IT-IMBK _ 40 Piece-Inside-Maintenance-Box-Kit-1000V

Description:
40 Piece-Inside-Maintenance-Box-Kit-1000V

What's included:

IT-11258: Socket-3/8"-3/8-Drive-12-Point-Deep-1000V
IT-11259: Socket-7/16"-3/8-Drive-12-Point-Deep-1000V
IT-11260: Socket-1/2"-3/8-Drive-12-Point-Deep-1000V
IT-11261: Socket-9/16"-3/8-Drive-12-Point-Deep-1000V
IT-11262: Socket-5/8"-3/8-Drive-12-Point-Deep-1000V
IT-11263: Socket-11/16"-3/8-Drive-12-Point-Deep-1000V
IT-11264: Socket-3/4"-3/8-Drive-12-Point-Deep-1000V
IT-11265: Socket-13/16"-3/8-Drive-12-Point-Deep-1000V
IT-11805F: Extension-3"-3/8-Drive-FlareEnd-1000V
IT-11810F: Extension-6"-3/8-Drive-FlareEnd-1000V
IT-1269: Ratchet-7.8"-3/8-Drive-1000V
IT-20208BB: Wrench-Box-3/8"-1000V
IT-20209BB: Wrench-Box-7/16"-1000V
IT-20210BB: Wrench-Box-1/2"-1000V
IT-20211BB: Wrench-Box-9/16"-1000V
IT-20212BB: Wrench-Box-5/8"-1000V
IT-20213BB: Wrench-Box-11/16"-1000V
IT-20214BB: Wrench-Box-3/4"-1000V
IT-20215BB: Wrench-Box-13/16"-1000V
IT-25250RA-3/8: TorqueWrench-25/250in/lbs-3/8-Drive-1000V
IT-30802: Nut-Driver-3/16" x 3"-1000V
IT-30804: Nut-Driver-1/4" x 3"-1000V
IT-30806: Nut-Driver-5/16" x 3"-1000V
IT-30807: Nut-Driver-11/32" x 3"-1000V
IT-30808: Nut-Driver-3/8" x 3"-1000V
IT-30809: Nut-Driver-7/16" x 3"-1000V
IT-30810: Nut-Driver-1/2" x 3"-1000V
IT-30836: Screw-Driver-Phillips-#1 x 3"-1000V
IT-30840: Screw-Driver-Slotted-1/4"x 7"-1000V
IT-30841: Screw-Driver-Slotted-5/16"x 6"-1000V
IT-57325: Hex-Wrench-T-Loop-3/16-6"-1000V
IT-57327: Hex-Wrench-T-Loop-1/4-6"-1000V
IT-57328: Hex-Wrench-T-Loop-5/16-6"-1000V
IT-57329: Hex-Wrench-T-Loop-3/8-6"-1000V
IT-66-156: Screw-Driver-Phillips-#2 x 4"-1000V
IT-66-205: Screw-Driver-Slotted-3/16 x 6"-1000V
IT-66-818: Nut-Driver-9/16 x 3"-1000V
IT-8010: Plier-Tongue-Groove-10"-1000V
IT-BBKCASE: 60Piece-BigBox-RollingTool-Kit-1000V-Frontier
IT-POUCH: Tool-Pouch
W010: 10" SOCKET RAIL
W3: 3/8" CLIP FOR SOCKET RAIL

Please note, This products is not eligible for free shipping***

Additional Information

Manufactured for use in compliance with:

Meets IEC 900 Standard for Insulated Hand Tools
Exceeds ASTM 1505-01 Standards for Insulated Hand Tools
Helps meet OSHA Requirements 29 CFR Part 1910.331-335
Subpart S; 29 CFR Part 1910.269 Subpart K
Meets NFPA 70E Requirement
Tested to 10,000VAC and rated for 1,000VAC Maximum Exposure
Impact Resistant and Flame Retardant

Kit Components:

3/16” x 4” Slotted Screwdriver
1/4” x 7” Slotted Screwdriver
3/8" x 8" Slotted Screwdriver
#1 x 3” Phillips Screwdriver
#2 x 8” Phillips Screwdriver

3/8” Dr Torque Wrench 30-150 in/lb
3/8” Dr Ratchet
3/8 “ Dr Ratchet Extensions: 3”, 6”, and 12"
8 Pc 3/8" Dr Deep Socket Set: 3/8" to 13/16"

8 Pc Box End Wrench Set: 3/8" to 13/16"
8 Pc 3" Nut Driver Set: 3/16" to 9/16"
4 Pc Hex Wrench Type "T" Set: 3/16" to 3/8"

10" Water Pump Plier
Great Tool Organizer

Each OEL manufactured hand tool is rated for exposure up to 1000VAC and dielectrically tested at 10,000VAC.

These tools meet or exceed ASTM F1505-01 and IEC 900 Standards for Insulated Hand Tools.
These tools are necessary for compliance with OSHA 1910.333 (c)(2), and NFPA 70E 2004.
The insulating material used to coat the tools is impact resistant and flame retardant.
Two-color insulation makes inspection easier, which adds to the overall safety of the tool.

Write a Review