Absolute Process Instruments API 1600 G _ AC input single alarm

Features:

Precision Internal AC/DC Converter
Field Adjustable Setpoints
Plug-In Design for Fast Installation
Input LoopTracker ® and Alarm Status LEDs
Alarm Test Button

Applications:

Process Limit Backup Alarm
Over, Under, Out-of-Range Voltage or Current Alarm
Heater Break, Conveyor Jam Alarm

The API 1600 G are factory configured for an AC voltage or current input and provide alarm contact outputs. Heavy duty relay contacts allow the module to directly control high capacity loads.

The API 1600 G provides a single setpoint adjustment and DPDT relay contacts. The alarm output is normal acting and can be factory configured for HI or LO operation. Topaccessible potentiometers are used to adjust the alarm setpoint and deadband.

LoopTracker and Alarm Status LEDs

API exclusive features include a LoopTracker LED that varies in intensity with changes in the input signal. A red/green bi-color alarm status LED visually indicate alarm status. These LEDs provide a quick visual picture of your process at all times.

Output Test

API's exclusive functional test button can be used to verify the alarm and system operation. Press the Test button to toggle the alarm relay(s) to the opposite state. The output test button greatly aids in saving time during initial startup and/or troubleshooting.

Specifications Table:

Input	0-50 mVAC to 0-300 VAC, 0-1 mAAC to 0-900 mAAC
Output	One 8 Amp DPDT Relay or Two 8 Amp SPDT Relays
AC Input Range	Factory configured, please specify AC input range Voltage: 0-50 mVAC to 0-300 VAC Current: 0-1 mAAC to 0-900 mAAC System voltages must not exceed socket voltage rating
Input Impedance (Voltage Input)	220 kÎ© minimum
Input Voltage Burden (Current Input)	1.0 VRMS maximum
Input Frequency	40 Hz to 1000 Hz sinusoidal
Input Protection, Common Mode	750 VDC or 750 VACp
Relay Output	Two SPDT form C contact sets operating in unison as one DPDT contact set One setpoint, 12 turn potentiometer, 0-100% of span Factory configured alarm type Normal acting alarm Standard: HI alarm Optional: LO alarm
Deadband	Alarm trip/reset window is symmetrical about the setpoint (1.0 to 100% of span, 12 turn potentiometer)
Output Test Button	Toggles relay(s) to opposite state when pressed
Response Time	70 milliseconds typical
Ambient Temperature Range and Stability	10°C to +60°C operating ambient Better than ±0.02% of span per °C stability, calculated, not tested
Housing	IP 40, requires installation in panel or enclosure API 011 or API 011 FS socket
Sockets	Socket mounts to 35 mm DIN rail or can be surface mounted
Power	115 VAC ±10%, 50/60 Hz, 2.5 W max

Write a Review