Absolute Process Instruments API 1000 G _ 5A, API PLUG-IN ALARMS

Write a Review

$269.00

Brand: Absolute Process Instruments
SKU:: API 1000 G
UPC:

Absolute Process Instruments API 1000 G _ 5A, API PLUG-IN ALARMS

Features with all optional accessories:

Current Stock:

Quantity:

Adding to cart… The item has been added

Description
0 Reviews

Absolute Process Instruments API 1000 G _ 5A, API PLUG-IN ALARMS

Features with all optional accessories:

Field Adjustable Setpoints
Plug-In Design for Fast Installation
Input LoopTracker® and Alarm Status LEDs
Alarm Test, Optional Reset Button
Sinking mA Input

Applications:

Process Limit Backup Alarm
Tank Level Alarm
Process Signal Over, Under, Out-of-Range Alarm

The API 1000 G are factory configured for either a DC voltage or current input and provide alarm contact outputs. Heavy duty relay contacts allow the module to directly control high capacity loads.

The API 1000 G provides a single setpoint adjustment and DPDT relay contacts. The normal acting alarm output can be factory configured for HI or LO operation. Top-accessible potentiometers are used to adjust the alarm setpoint and deadband.

LoopTracker and Alarm Status LEDs

API exclusive features include a LoopTracker LED that varies in intensity with changes in the process input signal. A red/green bi-color alarm status LED visually indicate alarm status. These LEDs provide a quick visual picture of your process at all times.

Output Test

API's exclusive functional test button can be used to verify the alarm and system operation. Press the Test button to toggle the alarm relay(s) to the opposite state. The output test button greatly aids in saving time during initial startup and/or troubleshooting.

Specifications Table:

DC Input Range	Factory configured, please specify input type and range. (System voltages should not exceed socket voltage rating) Voltage: 0-100 mVDC to 0-300 VDC Current: 0-1 mADC to 0-900 mADC
Input Impedance and Burden	Voltage: 250 kÎ© minimum Current: 50 Î© typical Voltage burden: 1.25 VDC at 20 mA current input
Isolation and Input Protection	750 VACp or 750 VDC common mode protection (Input isolated from power supply)
Relay Output	Two SPDT form C contact sets operating in unison as one DPDT contact set One setpoint, 12 turn potentiometer, 0-100% of span Factory configured alarm type Normal acting alarm Standard: HI alarm Optional: LO alarm
Relay Contact Rating	8 A at 240 VAC resistive load or 30 VDC resistive load 5 A at 240 VAC inductive load (cos f = 0.4) 3.5 A at 30 VDC inductive load (L/R = 7ms) See graph on other side for relay load ratings Caution: Do not exceed socket voltage rating Use an RC snubber for inductive loads
Deadband	Alarm trip/reset window is symmetrical about the setpoint (1.0 to 100% of span, 12 turn potentiometer)
Output Test Button	Toggles relay(s) to opposite state when pressed
Response Time	70 milliseconds typical
Ambient Temperature Range and Stability	10°C to +60°C operating ambient Better than ±0.02% of span per °C stability, calculated not tested
Housing	IP 40, requires installation in panel or enclosure API 011 or API 011 FS socket
Sockets	Socket mounts to 35 mm DIN rail or can be surface mounted
Power	115 VAC ±10%, 50/60 Hz, 2.5 W max

Write a Review