AEMC MiniFlex® Flexible Sensors MF 3000-10-2-1

AEMC MiniFlex® Flexible Sensors MF 3000-10-2-1 The MiniFlex® is a compact flexible AC current transformer composed of a flexible sensor and an electronic module. The flexible sensor permits measurements on conductors where standard clamp-on probes could not be used. In particular, it can be installed in confined spaces, places where access is difficult, or even wrapped around irregular shapes. The MiniFlex® is lightweight. It does not use magnetic cores like standard transformers. The transformation principle is based on an air core. It presents virtually no load to the system under test, has a low phase shift and excellent frequency response, and cannot be damaged by overloads. The sensor assembly is insulated for 1000V CAT III; 600V CAT IV. The MiniFlex® meets EN 61010 and is CE marked. It has an mV output proportional to the current measured for direct readings on DMMs, data loggers, oscilloscopes, and power or harmonic meters. TRMS measurements are taken when connected to a TRMS meter. The MiniFlex® is insensitive to DC currents and only the AC component of the measured signal is measured. The flexible sensor is available in lengths of 6", 10", 14", and 24". Perfect for use with Oscilloscope Model OX5042.   Model MF 3000-10-2-1 (Cat. #2126.82) Maximum Conductor Size 2.95" (70mm) Current Range 300 and 3000Arms AC Measurement Range 0.5 to 3000A Output Signal 10mV/A and 1mV/A Accuracy ±(1% + 0.25A) Phase at 50Hz 0.8° Output Cable 19.6" (0.5m) Coaxial cable with female BNC connector   Frequency Range 10Hz to 3KHz Battery Type 2 x 1.5V AAA/LR3 batteries Battery Life 70 hours typical Ampflex® Sensor The flexible sensor can withhold a temperature of 194°F (90°C) and is resistant to oil and Aliphatic hydrocarbons Cable Length (Module to Sensor 6 ft (1.83m) Battery Indicator yes Dimensions  (H x W x D) Module: 3.94 x 2.36 x 0.79€ (103 x 60 x 20mm) Weight  0.29 lbs (130g) Operating Temperature 32° to +122°F  (0° to +50°C) Storage Temperature -4° to +158°F  (-20° to +70°C) Operating Humidity 80% up to 50°F (122°C) Pollution Degree 2 Ingress Protection (IP) IP40 EMC EN 61326-1 Safety Compliance EN/IEC 61010-1 600V CAT IV, 1000V CAT IIIEN/IEC 61010-032:2002