AEMC 2129.86 AC/DC Current Probe Model MR6292 (for use only w/Model 6292)
Write a Review
Write a Review
Aemc
AEMC 2129.86 AC/DC Current Probe Model MR6292 (for use only w/Model 6292)
$440.00
- Brand
- Aemc
- SKU:
- 2129.86
- UPC:
- 6.85E+11
- Availability:
- In Stock
AEMC MR6292 Description:
This AC/DC is required for taking measurements in BSG (both sides grounded) mode with the 6292 and also has a proportional mV output for direct reading on the Micro-Ohmmeter.
AEMC MR6292 Specifications:
| Measurement Range | 1 to 50ADC |
| Accuracy | 1 to 50ADC: 1.5% reading ± 0.2A |
| Output Signal | 10mV/ADC |
| Load Impedance | >100k?/100pF |
| Insertion Impedance | 0.39m? @ 50Hz, 58m? @1000Hz |
| Working Voltage | 600Vrms |
| Influence of Adjacent Conductor | <10mA/A at 50Hz at 23mm from the probe |
| Influence of Conductor in Jaw Opening | 0.5% reading |
| Power Source | Powered by Micro-Ohmmeter Model 6292 |
| Jaw Opening | 1.2" (31mm) |
| Maximum Cable Diameter | One 1.18" (30mm) or two 0.95" (24mm) or two bus bars 1.2 x 0.4" (31.5 x 10mm) |
| Output | 4-conductor shielded cable with 5-pin XLR connector |
| Dimensions | 8.8 x 3.82 x 1.73" (224 x 97 x 44mm) |
| Weight | 15 oz (440g) |
| Saftey | EN 61010-2-32, 600V CAT III, Pollution: 2 |
What's included with the AEMC Instruments MR6292
- AEMC MR6292 Current Probe for the 6292 Micro-Ohmmeter, AC/DC
0 Reviews Hide Reviews Show Reviews
Aemc
AEMC AC/DC Current Probe Model MR6292
$329.00
AEMC MR6292 Description This AC/DC is required for taking measurements in BSG (both sides grounded) mode with the 6292 and also has a proportional mV output for direct reading on the Micro-Ohmmeter.
Aemc
AEMC AC/DC Current Probe Model MR416
$365.00
AEMC AC/DC Current Probe Model MR416 The MR416 is a hall effect current probe with 2 ranges designed for DMM and Data loggers. The probe has a 5 ft (1.5m) lead terminated by 4mm safety banana plugs...
Aemc
AEMC AC/DC Current Probe Model MR417
$389.00
AEMC AC/DC Current Probe Model MR417 The MR417 is a hall effect current probe with 2 ranges designed for oscilloscopes, waveform displaying instruments, and other frequency sensitive displaying...
Aemc
AEMC AC/DC Current Probe Model MR527
$490.00
AEMC AC/DC Current Probe Model MR527 The MR527 is a hall effect current probe with 2 ranges designed for oscilloscopes, waveform displaying instruments, and other frequency sensitive displaying...
Aemc
AEMC AC/DC Current Probe Model MH60
$715.00
AEMC MH60 Description: The AEMC MH60 (2153.03) AC/DC Current Probe (100A, 1MHz, BNC Output) is designed for use with an oscilloscope in total simplicity. Simply clamp the cable and measure. It can be...