AEMC MN77 Specifications ...

AEMC AC Current Probe Model C177A The AC Current Probe Model C177A features a measurement range of 5mA to 200A, with a transformation ratio of 10,000:1. Its maximum clamping diameter is 2.05" (52mm). The probe includes a 6.5' (2m) lead with proprietary...

AEMC Instruments SR182 Specifications: Maximum Clamping Diameter 2.05" (52 mm) Current Range 40 A AC Measurement Range 0.5 mA to 40 A AC Output 13' (4m) lead with proprietary CA connector Accuracy ±(3% R+ 2 cts) typical ...

AEMC MN82 Description When two MN82 probes are used in conjunction with the AEMC 6471 and 6472, grounding electrodes can be measured without the necessity of installing auxiliary rods and conducting a full potential measurement. This is also referred to...

AEMC Instruments MN251T Description: Designed to meet the most stringent demands in industry and electrical contracting, this probe meets the latest safety and performance standards. The probe has a measurement range up to 240 Arms which makes it the...

AEMC MR6292 Description This AC/DC is required for taking measurements in BSG (both sides grounded) mode with the 6292 and also has a proportional mV output for direct reading on the Micro-Ohmmeter.

AEMC AC Current Probe Model MN05 Small and compact, the AC Current Probe Model MN05 is the ideal complement for any multimeter to measure AC currents in low-power secondary or industrial applications.With its two ranges, it offers excellent resolution...

AEMC MN03 Description When used with an AC voltmeter, it allows you to directly read the current measured on the voltmeter. Features Small, compact size Measurement range of 1 to 100A AC Jaw opening accommodates conductors up to 0.39" diameter Designed...

AEMC MN01 Description: If there is a current in the conductor clamped, the Model MN01 is protected against overvoltages during disconnection from the measurement instrument. Features Small, compact size Measurement range of 2 to 150A AC Jaw opening...

AEMC MN373 Description The MN373 is a dual range current probe designed to measure low current...

AEMC MN352 Description: The AEMC MN352 (#2116.26) AC Current Probe, 10mV/A-150A Max, Jack is designed to meet the most stringent demands in industry and electrical contracting. The MN352 meets EN 61010, 600V, Cat. III safety standards and is CE Marked...

AEMC AC Current Probe Model MN313 The MN313 is a high accuracy and lower phase shift AC current probe. It has a 1000:1 ratio and an output of 1mA per amp in the primary (inside the jaws). The MN313 has an integral 5 ft (1.5m) lead terminated by shrouded...