Yokogawa MY600 Digital Insulation Tester, 50/100/250/500/1000 V, 4000 Mohm Yokogawa MY600 Digital Insulation TesterMY600 Digital Insulation Testerx Two colors for judging measurement results 0.5s high-speed measurement USB communication and memory function Insulation deterioration diagnosis Auto lighting backlight and LED lightImprove your inspection and regular maintenance efficiencywith MY600The MY600 Digital Insulation Tester has enhanced operation compared to the conventional model by using a shortened measurement time and color indicating judging function. This is a new concept in insulation testers with a communication function to enhance the affinity with a PC or tablet.Two colors for judging measurement resultsSet a desired reference value with the comparator function, and it will judge PASS (Green) or FAIL (Red) of a measurement result.Approximately 0.5 s high-speed measurement*Measurement time of insulation resistance is approx. 0.5 s, which contributes to reducing the operation time.* Under the conditions specified by Yokogawa, it may take time to measure due to the influence of capacitive component of a measuring target.Time comparison of measured value displayUSB communication and memory functionPC communication is possible with the dedicated USB communication adaptor (91030). Users can save as many as 1000 measurements to the internal memory from which data required for report generation, such as measurement data/time, measured value and range can be transmitted to a PC via communication. See the Documents tab for special manuals on the functionPrecision MakingInsulation deterioration diagnosis(PI and DAR measurement*)The increase and decrease of resistance value can be measured by continuously measuring the insulation resistance for a prescribed time. The insulation deterioration of the unit under test can be diagnosed by this increase/ decrease. This parameter is useful for Product Features: Enhanced measurement response times of 0.5 seconds and functionality for PASS/FAIL Judgement and Polarization Index and Dielectirc Absoprtion Ratio testing Ability to log up to 1000 data points to internal memory for offline analysis to PCAutomatic LED backlight when working in remote areas with low visibility Large voltage generation and resistance measurement ranges to suit wide variety of insulaiton types Basic voltage measurement accuracy of +/- 1% of reading and resistance measurement of +/- 2% of reading with ability to measure up to 4000 MΩ Power off function that minimizes idle time and conserves battery life Built-in auto-ranging for improved resolution at lower resistance levels IP40 Protection Grade for enhanced ruggedness in harsh enviornments