Used essentially fro the storage of 732xx
AC/DC clamp probeAC: 130 A (40 Hz to 1 kHz)DC: ±180 A
This is a AC/DC clamp on probe with high reliability, high precision and portability. It has true RMS value, can be used for low impedance voltage measurement,...
Easy to use: Connects via ethernet, serial, USB and is compatible with direct thermal label rolls with 1 in core, max diameter of 5 in, and max media width of 4.25 in
No ink or toner: Prints using direct thermal technology which...
Input: 100V Output: 90-110V Output adaptor jack size: 5.5mm x 2.1mm
Safety features: Automatic overload cut-off, over Voltage cut-off, automatic thermal cut-off, short circuit protection.
Enough 72W output power and 24V stable output...
Current clamp-on probe accessories for digital power meters, power analyzers, and digital multimeters.AC 400 Arms (600 A Peak) / AC 1000 Arms (1400 A Peak)
Wide dynamic range: 0 Arms to 400 Arms (AC); Max. 600 Apk (AC)
Product Description and Function
Measures alternating current (AC) and direct current (DC)
Converts high-current signal to low-level millivolt signal so it can be read by a testing device
Hall effect clamp with 0.75" (19 mm)...
For carrying the CA450, the test leads, and the lead cables.
This product is an accessory for the following products:
Yokogawa CA450 Process Multimeter
Digital multimeter with loop power and 4 to 20mA output function
Yokogawa TY500 Series...
The Clamp-on Power Meter CW10 (Single-Phase) is more like a tester type rather than a recorder, which can measure single phase AC and DC Power, Voltage, Currents, Power Factor, Frequency, Harmonics. It will also contribute to workers maintenance of not...
This device allows the user to make safe current checks of 4 to 20mA without breaking the loop. In addition, the output function provides a simple way to log and monitor the data.
0.2% Accuracy, 0.01mA Resolution
LED Torch Light, Backlight...
Number of Items
105mm W x 250mm H x 49mm D
True RMS display
AC/DC current measurements with current ranges up to 600A for
AC and 1000A for DC
AC/DC voltage, resistance and frequency measurements 33mm in diameter of measurable conductor
Data hold function
Approved for conformity to...
AC/DC current measurements with current ranges up to 2000A
AC/DC voltage and resistance measurements
55mm in diameter of measurable conductor
Mean value display
Data hold function
Approved for conformity to safety standards...